16208 Results for "《 예약문의 OIO≡⑧④89≡83O⑥》선릉레깅스룸㉹ベgrace레깅스룸Ｓ선릉레깅스룸선릉레깅스е я레깅스룸비용superstition 강남레깅스룸′강남레깅스§８fetch"

CAD files now on github.com
Log from RETRO 1 - Home Computer Console
Created a repository on github.com and uploaded the my current set of files to there. Here is a link to that repository.the-lab-guy/retro-1-computer: CAD files for 3D printing a case for a retro 80s-style home computer project (github.com)They files...

Hack Chat Transcript
Log from High Vacuum Hack Chat
Dan Maloney 3:00 PM OK welcome one and all to the Hack Chat! I'm Dan, I'll be moderating today along with Dusan as we welcome Niklas from Advanced Tinkering. We're going to be talking about nothing, or as close to it as we can get -- high vacuum AdvancedTinkering ...

Hack Chat Transcript
Log from Biomedical Engineering
Dan Maloney 3:00 PM OK, welcome everyone, let's get started. I'm Dan, I'll be modding today along with Dusan as we welcome Nyeli Kratz to the Hack Chat. Today we're talking about biomedical engineering. Walter Lite 3:00 PM hi dan Dusan Petrovic 3:01...

Supplies
Log from Sound-activated Counting Light
In this demo, a sound module, a WS2812 module, and a MaESP ESP32 OLED are needed, and they all ccan find in MaESP dev kit. Sound module Sound module is the most sensitive to the environment sound intensity, commonly used to detect the intensity of the...

Step 1: Hardware
Log from Sound-activated Counting Light
Connect the sound module and ws2812 module to the ESP32 OLED, VCC to VCC, GND to GND, and DI pin of ws2812 and OUT pin of sound module to GPIO pins which you difined in the code, and note, in this demo, it need to use pin4(SDA) and pin5(SCL) for OLED,...

Step 2: Software
Log from Sound-activated Counting Light
At first, we need to prepare the environment for ESP32 development board programming in arduino, and you can cheak this guide.secondly，Install the libraries and files which will be used This is a library for our Monochrome OLEDs based on...

Step 3: Result
Log from Sound-activated Counting Light
As you can see in the vedio, when the sound sensor detects the sound, the "count" will increase, and the light ring will emit different colors of light according to the change of the number of “count”, 120 numbers for a round. If you are...

Foot pedal revival
Log from Foot camera control
The lion kingdom once made a foot pedal shutter control. 10 years later, there was finally a need for it.Then came another idea make the foot pedal wireless. The foot pedal camera controller lions made many years ago worked with the EOS 5D...

First post
Log from Home Jumbotron
I have the RGB LED Matrix working running off a raspberry pi. I modified an example from https://github.com/hzeller/rpi-rgb-led-matrix to receive pngs over ZeroMQ and display them. Currently I can get about 30fps of live streaming video...

Results first!
Log from Tongue Drum Music Robot
posting some videos of the present state of the project before doing more of a writeup.

Initial Testing
Log from Delta Printer - Capacitive Nozzle Probe
An Arduino ESP32 was setup using touchRead() in the main loop to toggle the onboard led and stream the read value out over Serial. A single 15mm x 15mm x 1mm pad was tested with dial indicator to get a feel for the trigger range. The led...

Side Project
Log from Delta Printer - Capacitive Nozzle Probe
A digital bubble level was built to measure the platform tilt over the travel range. This consists of an ESP32 dev board with 1.9" LCD and Sparkfun ICM-20948 breakout board. The base was small enough to mount on the effector...

Mylar V2
Log from Delta Printer - Capacitive Nozzle Probe
A Y-shaped section of black mylar was cut on the laser cutter with some holes to attached to clips printed from PLA. A section of copper foil tape was placed in center of the Y for contact with the nozzle. With the probe clipped onto the...

Goals and Motivations
Log from Poetroid - Poetry Capturing Camera
The goal is to create a portable and self-contained instant-style camera that prints poems instead of pictures. Some of the motivations for this project: - A desire to create a fun art project to share with my friends while playing with my favorite things: impossibly...

Lawnny Five is Aliiiiive!
Log from Lawnny Five
Wish I could say it was an eventful experience, but it worked almost perfectly the moment I put power to it. I was pretty nervous powering it on because of the weight of the bot and power of the motors— it could do some serious damage. Only thing I had...

|<
<
1076
1077
1078
1079
1080
>
>|