16208 Results for "《〈 문의 OIO↗5793↗7458 》〉강남초원의집㉩⅓everythingァ강남유흥강남룸㏁evidently 강남초원의집강남더킹 강남더킹‡강남룸Ⅹfaintly㈆"

Timing troubles
Log from neopixel clock
Few hours fiddling with code this afternoon.Have dropped brightness to 1/32 of full power! Doesn't leave a lot of room for going dimmer.Deciding how to actually display the time is quite tricky in itself. I have an inner ring with 12 leds and outer with...

Oh No! *Pop*
Log from FLED
So just after presidents day we came back into the office and found that the FLED was dead! Turned it on and nothing happened. After eliminating the ATX PSU from the equation it became clear we would need to pull the display down and open it up to find...

Live and Learn
Log from Roadrunner (the Arduino-Tiva)
The boards arrived on Saturday. I finally had time to sit down Monday night and begin populating one. Full disclosure, this was my first time doing and fine pitch or SMT work. I began by doing a full electrical test on one of the boards, which it passed....

Modelling in the MapleSim Environment
Log from Object Following Control of a Robotic Camera Arm
As the first step of this project, kinematic model of the robot manipulator is derived. Then using the inverse kinematic equations, a given trajectory (shown by the red line) is followed while the camera (represented by the blue arrow) tracks the object....

Removing undesired reflections/spots
Log from Open Indirect Ophthalmoscope
Hey all!This is another project log to update the latest developments of OWL (Just in case you forgot, we call it OWL because, well, Open Indirect Ophthalmoscope, OIO).So, since the last time I made a log, we’ve been working on--making an elegant GUI...

Update. And a Warning...
Log from Custom Christmas Light Display
My strings of GE Color Effects are quite old - purchased in 2010. Evidently in the past couple of years, they have changed the lights to a style which is not hackable. The new lights have 2 wires per bulb/pixel (one in, one out), which provides...

Project Log 2
Log from Raspberry Pi Photobooth
I'm starting with PL2 because it's late and I don't want to write about my code/ GPIO layout tonight!Today I spent some time getting started with the photobooth front. It's a piece of plywood with some mason jar lids glued into holes I cut. In the lid...

Let Down and Hanging Around
Log from Rämixx500 - Amiga 500+ Mainboard
I was let down a lot by how the "Community" received this board. I thought it would spark a lot of interest, as it could be the starting point for a lot of new things. The first obvious goal was making replacement boards for A500+ machines but this was...

De-clicking the keybed
Log from NanoEgg Music Synthesizer
So, in the last project video, you could definitely hear the keys clicking when I played it. When I looked at other keybeds, I noticed that they used stick-on felt on some surfaces to reduce that sound. I searched around and found sheets of the stuff...

Aussie Sawppy - Dumb things I did
Log from Aussie Sawppy
So I finally have the software sorted and I can "drive" the servos on the kitchen table by logging onto the Pi's network with my smartphone. A eureka moment of sorts! . I pause here to thank @Roger for responding with generosity and verbosity to my requests...

Prototype Board Design#2
Log from InterNoC
In this log, the first renders of the pcb layout are presented and a major change in the design. First off, the change was that we changed the FPGA package as obviously the 484 pin was an overkill for this design. The package was switched for the 256...

Topic 1: Fundamentals
Log from High Speed Digital & Mixed Signal Design
There is a major limitation with circuit schematics: 3 circuits (with the same schematics) may have significant performance differences which are a result of the physical layout of the circuits. Therefore it can be said that how a circuit is implemented...

Rev 1. PCB Assembly!
Log from CRAPi2040
Alright here we go! In case you missed the last log, here it is! Check it out because what you're about to see will make a lot more sense. Just like the last log, this log is going to be a retrospective, but I promise that the next CRAPi2040 log to grace...

Frankenso 0.2
Log from rusEfi
Finally everything is on the same board :)

2018-04-21
Log from Valify V2 Robot Lawnmower
3D printing New front nose, ready in 1h. Hopefully everything fits perfect!

1
2
3
4
5
>
>|