Close

525 Results for "raspberry pi"

  • First one assembled

  • The first device skips the 5V regulator, as I am testing it with a raspberry pi. Everything is red, even the LED. I began to test it for the raspberrry pi as this needs the additional python software required to shut-down the pi safely. I am thinking...
  • Hardware Prototype started

  • After long delays, I got a Raspberry Pi Zero and have wired up some hardware for testing. A pl2303 usb-serial converter gives me a console, and a usb-ethernet adapter is hooked up through a otg cable. A clone of the adafruit ina219 breakout is monitoring...
  • Next step - RPI4CM

  • Gonna start next project on Raspberry Pi 4 CM with good DAC and other features. Can be gaming console with the same internals. Need experts in crowdfunding (to buy modules and develop PCB)
  • Power Domains and Management

  • For anyone following along, the power domains are: constant 5V supplied via plugged-in AC cord (VDD on schematic) switched 5V to R Pi Zero W via load switch on PCB (V5P on schematic) switched B+ DC and filament AC via volume control switch contacts The...
  • ZeroBug Lite

  • With the chip shortage still raging on, building a ZeroBug with the rare STM32F103 is becoming increasingly difficult. I was looking for a replacement for a while, even considering an ESP32. But now that the powerful Raspberry Pi Zero 2 is here, an additional...
  • Pi Plug & Play Prioritised

  • So I realised it would probably be a good marketing / UX decision to make my hub as easy as possible to use with a Raspberry Pi.To that end, I'm going to make the Hub essentially a "HAT". The shape & size may not be suitable, but I can easily make it...
  • Design modifications

  • Second prototype made several design changes -  Switched from Pi Zero W to Pi 3B+, Required some serious slimming down of the PI.  Used better battery and charge circuit,  Routed the keyboard PCB in one piece, modified button design to...
  • First day

  • Decided to do a square inch entry with an idea that I've had floating around for a while. A bit of work with Eagle and I have a PCB designed, a bit of work with a browser & spreadsheet & I have a costed BoM.I've tried to design it with hand-assembly...
  • First things first.

  • As I said in the project information, this project has three phases. First, redesign the circuit to work with the Raspberry Pi. Second, make a PCB design for the new circuit. Third, modify the original BattMan II software to work on the Pi.These tasks...
  • Good and bad news

  • First the good news: after building up my "final" prototype of the LiFePO4wered/Pi board, I was able to do some testing. It seems I managed to improve the efficiency by going to a smaller but less resistive inductor, so now I got a run time of 1:14 with...
  • Preparing the Pi(e)

  • Get it? Preparing/cooking a pie? Pi?... *ahem*It's pretty obvious that the Raspberry Pi won't fit into the Mac's casing, so I'm going to be trimming it down. If you're interested in learning more about this process, you can look up 'diet pi' (or, of...