Ok, so, this project is still entirely ones and zeros. I KNOW. Serious lack of follow through on my part. In my deference, this is where I am right now:That little blue dot in the Atlantic has been home for the last week. Also, my wife is pregnant with...
Express your interest to buy new HydraBus board (or both HydraBus+HydraNFC)HydraBus 1.0 Rev1.2 new features:Easy way to enter USB DFU (will not require any wire) and fully compatible with older HydraBus hardware & software/firmwareBetter labeling of...
HydraBus 1.0 Rev1.2 new features:Easy way to enter USB DFU (will not require any wire) and fully compatible with older HydraBus hardware & software/firmwareBetter labeling of all I/O (with GPIO name) on both sides of the PCBHydraBus new price 39USDPurchase...
HydraBus boards are now back in stock (with same price as before) and new features:New PCB v1.0 Rev1.2+ (add capacitor for MicroSD +3V3 for even more stable supply for big microSD/SDIO …)Replaced MCU STM32F405 by STM32F415 with hardware cryptographic...
HydraBus v1.0 Rev1.4 Schematic/Board Layout are available on github, everything is done with the amazing KiCad PCB HydraBus: Hardware license CC BY-NC 4.0 (for commercial license contact info@hydrabus.com) For more details on the hardware see also http://hydrabus.com/hydrabus-1-0-specifications...
HydraBus v1.0 Rev1.5 Schematic/Board Layout are available on github, everything is done with KiCad PCB v6.0.11 HydraBus: Hardware license CC BY-NC 4.0 (for commercial license contact info@hydrabus.com) For more details on the hardware see also http://hydrabus.com/hydrabus-1-0-specifications...
3/1/14 Add information for escapement pcb. Still to go, bendulum clock pcb. This has the same functionality as the escapement pcb but also has NIMH battery backup to keep the clock going if the power fails.
The current state of the project is that I have a working breadboard implementation of the circuit, and all the firmware seems to be working as well. The last week or so I entered the schematic into EagleCAD and designed a PCB based on that. So I am...
So the PCB fabrication worked out nicely. I recently switched from using the toner transfer method of home fabricating PCB's to the UV exposure method because I wanted to make compact boards with small SMD components. My experience with toner transfer...
Now that there have been a couple events under the belt for this machine: sons birthday party and a carnival, I am looking to make the claw machine more noise immune. The last event showed a random reset of the machine that would cause it to home...
The boards are finally finished. This was a long time coming, but I could machine the pcb's (which I have been wanting to do pcb milling for quite some time, but things did not fall into place until now) the mill have to become operational. The...
New photos of the PCB fabrication for the newest and coolest module (Thor) have been posted, component list has been updated and the general info has been better articulated... It's still a whole bunch of words to me, but at least it's much more accurate,...