11059 Results for "《〈 문의 OIO↗5793↗7458 》〉강남초원의집㉩⅓everythingァ강남유흥강남룸㏁evidently 강남초원의집강남더킹 강남더킹‡강남룸Ⅹfaintly㈆"

Design Choices
Log from Pokey Watch
This is just a brief discussion of some of the choices that were made in the design of this project.First and foremost, everything was designed to be fabricated and assembled by me, "in house" so to speak. That meant that any chips had to be hand-solderable,...

November 2014 - Designing a prototype source pt. 3
Log from Low Cost X-Ray Systems for Developing Nations
Around the end of October, I finished up the design of all the plastic components which would house the electronics of a 200W x-ray system. It was now time to design those electronics!Back in September, I had an idea of how I should go about doing this....

First post
Log from Pokey Watch
This project was underway before I actually was on Hackaday.io, so a quick summary of where things stand:-The PCB seems to be functional. It milled just fine and there weren't any assembly issues.-The software is at a rough prototype stage. It has a...

hard times
Log from Mini Tracker
looks like everything fits in one square inch, but the pcb is not routed... yet

Officially complete!
Log from Internet Connected Boot Dryer
The project is now officially completed!I got the new PCB's which solve the AC isolation problem and everything is working perfectly now!The ESP32 is no longer being affected by the fan, everything is working just as designed.I'm really excited,...

Update #1
Log from Low amperage PCB switch for robotics
I ordered the PCB, and parts from Mcmaster Carrshould have everything in about two weeks to test .

Prototype Board Design#2
Log from InterNoC
In this log, the first renders of the pcb layout are presented and a major change in the design. First off, the change was that we changed the FPGA package as obviously the 484 pin was an overkill for this design. The package was switched for the 256...

Topic 1: Fundamentals
Log from High Speed Digital & Mixed Signal Design
There is a major limitation with circuit schematics: 3 circuits (with the same schematics) may have significant performance differences which are a result of the physical layout of the circuits. Therefore it can be said that how a circuit is implemented...

Rev 1. PCB Assembly!
Log from CRAPi2040
Alright here we go! In case you missed the last log, here it is! Check it out because what you're about to see will make a lot more sense. Just like the last log, this log is going to be a retrospective, but I promise that the next CRAPi2040 log to grace...

Next Steps
Log from Coffee Timer : OLED + Arduino
Next steps:Make PCB for the components.Fit everything into a case with magnetic back.Battery power. Any advice gratefully received!

Challenges
Log from 100% reusable electronics
Evidently as with every new idea comes unexpected twits and challenges.Cavity plate materialThe first time I tried this process I picket the wrong material for the cavity plate.So far I have presented the idea in the next phase of this project, the implementation...

New DAC/AMP is done!
Log from USB DAC with amplifier
I just finished soldering the components on the latest PCB. Did some testing and everything seems to work. Had some problems with the volume at first, it would change randomly when i got close to the PCB. I think a bad ground connection caused this....

Random Update
Log from S500 Quadcopter Build
Hey so this project hasn't been abandoned it was just put on the backburner because I cheaped out and bought everything from china, turns of the PCB was garbage, so I bought an authentic one from hobbyking. At some point I'm going to completely disassmble...

Hack Chat Transcript, Part 2
Log from PCB Thermal Design Hack Chat
Mike Jouppi12:55 PM Mike Jouppi12:55 PMOk, here is the board stack up Sven F12:55 PMOK, thank you very much. Your links are already helping me! Do you know any surface mountabe heatsinks manufacturers, too? So far I used some BGA-heat sinks and mounted...

Project Created !
Log from GPS Tracker
I just created the project ! I made some test, everything works well ! I am waiting for the WS2812 leds to arrive (they are missing on the project pictures) and I will probably post a video to show how it looks like .To come : Schematic, PCB, Code and...

1
2
3
4
5
>
>|