8582 Results for "↘ 최저가 Ò1Ò〈⑻⑷89〉83Ò⑥ ↗ 강남쓰리아워㉵ 강남쓰리아워rest강남쓰리아워ル쓰리아워가격obs 강남술집정보ㅈ쓰리아워가격¤강남쓰리아워Ｉ─쓰리아워가격minute"

Tinymovr
Log from Ø32 BLDC Controller
Found out about the Tinymovr motor controller. Basically what I'm trying to do! Very cool, and my version 2 will use it as reference. I hope to make mine even smaller (27x27mm vs 40x36mm) and cheaper ($40 vs €89). I only need up to 13V (3S lipo),...

5V, 5W Version Posted
Log from LM5161 Based DC-DC Bias PS
I made a 5V, 5W buck derivative that is smaller than the flybuck design but uses the same input/output filter design for low noise/ripple applications. The inductor core is a Magnetics MPP C055048A2. with 38 turns of 24 AWG. Peak efficiency with...

Firmware development + Front Lights case
Log from Electric mountainboard with CAN bus + Android app
I modified Android application and Control Unit firmware so that front lights can also be controlled (brightness, blinking mode) via Bluetooth. Previously only rear lights settings were being sent from the phone. Now Control Unit receives all the settings...

Improving mocks
Log from Ricoh GRIII(x) firmware exploration and hacking
Improving mocks I have decided to use Rust for mocking libcmfwk and libshmem_manager, as it is the language I am most comfortable with. By creating accurate mocks for these libraries, I aim to resolve the issue where camctld hangs while trying to send...

Sun Tracker 2 Revision 1 - Prototyping Board
Log from SunTracker 2 Revision 3
With the compass functionality tested on a breadboard, the next step is to transfer it to a universal prototyping board, adding a status display and IO expansion ports to drive a LED ring that simulates the horizon. For the board, I am going to use the...

The resistive touchscreen
Log from Portable environmental monitor
July was a tough month, and August is no different. Due to some components arriving late, I've only been able to start my work on the Hackaday.io project with considerable delay. So I had to catch up with everything and squeeze the entire development...

More Peripherals and some tablet bytes.
Log from WiiChuck
The amazon fairy dropped off a "NES Classic Controller" and a "Classic Pro"The classic pro comes up as a classic controller, The only difference is the analog R and L on the one I have are buttons and just return the max value when pushed. Although this...

Nonlinear response to improve usability
Log from Stingray
I should apply a gamma curve to the analog axes read from Classic controller to make the response of the stick more subtle near the center and more steep close to the edges. Classic controller analog sticks provide position information with...

Top 100 Projects by Skulls
Log from Statistics for 2015 Hackaday Prize Entries
Place View Count Followers Comments Skulls Project Author 1 32400 415 56 148 Bench Power Supply The Big One 2 19900 370 38 142 3D Printable Robot Arm Andreas Hoelldorfer 3 48300 273 112 120 Luka EV MW Motors 4 4600 101 20 114 Eye Controlled Wheelchair!...

Top 100 Projects by Followers
Log from Statistics for 2015 Hackaday Prize Entries
Place View Count Followers Comments Skulls Project Author 1 32400 415 56 148 Bench Power Supply The Big One 2 19900 370 38 142 3D Printable Robot Arm Andreas Hoelldorfer 3 31700 333 21 88 Arduino anti-theft alarm shield IngGaro 4 48300 273 112 120 Luka...

Top 100 Projects by View Count
Log from Statistics for 2015 Hackaday Prize Entries
Place View Count Followers Comments Skulls Project Author 1 61900 273 85 98 EM-Drive movax 2 48300 273 112 120 Luka EV MW Motors 3 32400 415 56 148 Bench Power Supply The Big One 4 31700 333 21 88 Arduino anti-theft alarm shield IngGaro 5 29700 149...

The actual informations
Log from Extension card for TDS3000 scopes
Detecting and identifying a card As stated in an earlier log, the card insertion is detected by grounding the pin *CD. But this is not enough to make the scope believe he have a know card inside him. You need to indicate him what type of card was inserted....

Top 100 Projects by Comments
Log from Statistics for 2015 Hackaday Prize Entries
Place View Count Followers Comments Skulls Project Author 1 48300 273 112 120 Luka EV MW Motors 2 61900 273 85 98 EM-Drive movax 3 23500 245 73 106 ARDUINO MPPT SOLAR CHARGE CONTROLLER Debasish Dutta 4 18600 149 64 67 SubPos - Positioning System Blecky...

SATA, DDR3, Verilog Visualizer and Other Stuff
Log from Nysa: FPGA Development Environment
SATA StatusAfter weeks of painful debugging. I have been able to read and write to the hard drive!I ran into an issue though... the speed at which I can communicate with my FPGA to/from my computer maxes out at about 16MBs and the hard drive reads/writes...

A detour to the Pano Logic G1 (1) - LPDDR
Log from VerilogBoy - GameBoy on FPGA
As I have mentioned in the previous update, I am still having some trouble with the MIPI-DSI. Currently I do not have access to any soldering tools, so the plan of making a new revision of prototype need to be postponed. In the meanwhile, I thought it...

1
2
3
4
5
>
>|