35398 Results for "《〈 문의 OIO↗5793↗7458 》〉 셔츠룸ヒ《〈 문의 OIO↗5793↗7458 》〉㎛beforehandム셔츠룸후기셔츠룸후기╇pen 선릉셔츠룸셔츠룸가격 셔츠룸‰강남셔츠룸㉦nestㅳ"

Removing undesired reflections/spots
Log from Open Indirect Ophthalmoscope
Hey all!This is another project log to update the latest developments of OWL (Just in case you forgot, we call it OWL because, well, Open Indirect Ophthalmoscope, OIO).So, since the last time I made a log, we’ve been working on--making an elegant GUI...

Design Considerations
Log from Open Indirect Ophthalmoscope
Earlier version of the device was reconsidered in terms of following aspects:• Accommodating for different refractive errors • Aesthetics • Ergonomics • Weight distribution OIO ASSEMBLY EXPLODED ASSEMBLY1. ACCOMMODATING FOR DIFFERENT REFRACTIVE ERRORS...

Donor Cabinet work
Log from Star Trek: The Mirror Universe Pinball
7/29/2013: As I stated; been working on the cabinet for the Mirror universe project. I bought a couple of "project" Bally Star Treks from a fellow pinball collector out of Shertz a few years ago. These have been setting in storage for a while... and...

Holding a Pen
Log from SpiroBot
During the initial design stages of the SpiroBot, the issue came up of how the robotic "arm" was to hold the pen. Our particular design required that the pen be able to move vertically to adjust to small irregularities in the height of the platform and...

First Print
Log from 3D Printable Stroke Victim Writing Utensils
Some stroke patients can hold onto a ball, but not a regular sized pen. So the solution is to put a ball onto a pen. The large surface area of the ball allows for weak fingers to hold onto the pen. I used tinkercad to create a 50mm sphere with a 9mm...

Feeder
Log from brdMaker
Gear now uses 1.2mm x 20mm nails. Just flat head is cut off with side cutters. With correct size of hole, pins are easy to push in into correct depth. Little screw locking is applied into hole beforehand. Ordered some HAL sensors from TI. When arrives,...

New photos and size comparison
Log from USB-C-PD Soldering Pen for Weller RT Tips
I've done a side by side photo of the RT Pen and the original Weller.When about the half wattage is enough, much table-space and cash can be saved with RT Pen. The RT Pen includes every feature for hobbyist usage. I've tested the the RT Pen with...

Hackaday fail #1
Log from SACO LED Display
How not to make a spot welder penMy first attempt at making a spot welder pen has failed.I bent the electrode ends of my existing spot welder pen inwards, then smashed them flat with a hammer and flat-end punch until they were about the thickness of...

Pen Holder v2
Log from plotbot
I got myself a nice little linear rail from smalltec.de for 50 bucks: This will now serve as the z-axis and also provide suspension so that the pen will have more or less constant pressure on the paper. The parts for attaching all the stuff were made...

Project stopped
Log from PenOCR
Unfortunately the project stopped a while ago, since it was simply too difficult to get reliable data from the mouse sensor. The sensor did not seem to be able to see text even with different lighting configurations. Should anyone wish to do something...

Magnetic pen clamp turns laser cutter into plotter
Log from 12V Lasercutter
My Digitac pal Uwe Reisinger could not be stopped to help me with the pen for the public presentation. Lasers are way too dangerous to expose the radiation publicly. Therefore he built a penholder head which will be connected instead of the laser module....

Pi Pico controller PCB made
Log from C.ITOH CX-6000 plotter upgrade
Jogging and pen/up down from the original control panel works pretty well - but the code still needs a bit of polishing. There are reset in and out signals I have to figure out how to put to work - and the red alert LED should be lit on error conditions...

Take a stand...
Log from Soldering pen
This is exactly why I love 3d printers. When you have an idea you draw it and then you print it. Simple as that.Of course the soldering pen needs a stand. And why can't it be printed?I know that a lot of people will tell me that it will melt and maybe...

customised spacehuhn case
Log from LAMEBOY - another ESP12 handheld
I've used a 3D printing pen to test if I could do some inlays with that - I think it worked out reasonably well :)

Plotter pens are tricky
Log from Plotter art with Mutoh iP-220
After usual wait of one month I got pen adapter ordered on Aliexpress:I chose this model because one can change tip position by screwing in or out part with cylindrical protrusion. This gives some versatility, but also creates a few challenges. First...

1
2
3
4
5
>
>|