997 Results for "《〈 문의 OIO↗5793↗7458 》〉 셔츠룸후기た《〈 문의 OIO↗5793↗7458 》〉 ⑷plenty㎋셔츠룸후기셔츠룸후기んteeth 셔츠룸후기선릉셔츠룸 강남셔츠룸￦셔츠룸ⓤsilverⓞ"

Build Instructions: Laser Emitter Assembly
Log from ramanPi - Raman Spectrometer
Note: This log entry is a living document. I'll be updating this post to reflect the current configuration as time goes on.. There will also be a log at the end of the post noting modifications to the log, etc..UPDATED-----> 09.25.2014This log entry...

controlBoard - schematic and board information
Log from ramanPi - Raman Spectrometer
Note: This log entry is a living document. I'll be updating this post to reflect the current configuration as time goes on.. There will also be a log at the end of the post noting modifications to the log, etc.. UPDATED-----> 10.15.2014This log entry...

THP Semifinal Video (with transcript)
Log from ramanPi - Raman Spectrometer
THP Semifinal VideoBelow is the transcript for this video... Sorry it runs a little fast, but there's a ton of information!! =)ramanPi started as a project to fill a need I had for another project I am still working on. I had to obtain the bond...

Axis homing tests
Log from SatNOGS - Global Network of Ground Stations
Using the first version of satNOGS hardware we figured out that some times due to various reasons (software, mechanical or power malfunctions) the rotator might end up in an unknown position.At that point, the only way to resolve that situation was to...

Some notes on speed
Log from Cinemagraph Display
I want to be able to support 30 frames per second animated GIF's at 24-bit RGB. The LCD I chose for version 0.2 is max 320x240 pixels. 320 * 240 * 24 = 1843200 bits per frame. The LCD controller supports paging, so I can load one animation...

What's implemented
Log from AVR spectrum analyzer
You can see the progress in the quarterfinal video:Works:1st button - backlight control2nd button - 16 modes of spectrum and VU meter: https://cdn.hackaday.io/images/8052571408534158067.png3rd button - 8 different symbols to draw spectrum bars4th...

Final Assembly
Log from ROSCOE - A Scalable, Platform Independent Robot
Replaced Max232 chip with multi-drop mux board to perform TTL to RS232 to talk to motor controller. Board also provides RS485 and USB for the addition of those devices if necessary. Cleaned up sound by adding mass and damping to speaker box, as much...

It works!
Log from Smart Battery Tester
I'm getting close to finishing this project. I decided not to add a charger IC, as it would be very difficult to be able to charge all the different types of batteries I want to support. Right now I can test LiPo/LiIon, LiFe and Lead Acid batteries....

Wifi Module chosen
Log from Data Collection Terminal
I hooked up the USR WIFI232-S serial to wifi module to my laptop and spend a while seeing how well it connected to my access point from different locations. Only 4 wires were needed +3.3V, 0V, TXD and RXD so I was able to use a small USB to TTL converter...

Thoughts
Log from PC general purpose interface
Maybe I should ditch the CPLD and use a PSoC4 instead...With the CPLD I would have to use a dedicated USB interface IC.When using the PSoC4 I can use any kind of serial interface, and also the dedicated usb chip. Along with the extra features that can...

IR Commands
Log from OpenIR - Infrared Remote Control
Revision A of the board is now working and can send a single IR sequence out to a device in the real world when the on board switch is pressed. If OpenIR is to be truly universal the system needs to be able to send a multitude of commands not just...

OpenIR Software Design Update
Log from OpenIR - Infrared Remote Control
Revision A of the board is now working and can send a single IR sequence out to a device in the real world when the on board switch is pressed. If OpenIR is to be truly universal the system needs to be able to send a multitude of commands not just a...

OpenIR Windows Configuration Application
Log from OpenIR - Infrared Remote Control
Progress on the OpenIR project has been a little slow recently, Christmas has come and gone and now a heavy workload is slowing things down further. Having said that, today has seen the project pass another milestone with a Windows configuration application...

Driving the IN-12A
Log from Modular Nixie Display
The IN-12A nixie tubes are operated at very high voltages, and microcontrollers can't handle voltages much higher then their VCC voltage. So that the IN-12A's can be controlled by digital logic circuitry, it is required that we have some sort of device...

The Loose Threads in 2015
Log from VGAtonic
Hey folks, lots of new stuff posted over at the 2015 log of VGATonic.I recently pushed a couple alternate firmwares:One for 848x480 (and 424x240) VESA compatible 16:9 outputOne for 320x240 in 16 color NTSCGo check it out if you're still following along;...

|<
<
3
4
5
6
7
>
>|