As you can see airodump-ng picked up the WiFi of the drone and also that it is running on channel 2. Next I recorded some packages. sudo airodump-ng -w JJRC_out -c 2 -bssid 10:A4:BE:2E:77:B5 wlan0mon While recording I simply used all the functions the...
I got approached by PCBway who wanted to sponsor a batch of assembled prototypes, and i just received them and fired them up!! I wanted them without the inductor and tube holders because i want to experiment a bit with different tubes, and to check...
As the misery spreads, it seems only fitting that we should recognize those who are unfortunate enough to suddenly complete the SMD Challenge. To be included in this club, you must submit photographic evidence (or link thereof) of a working SMD...
Finally we got to post on Hackaday! We're back from Makerfaire - it's been a very busy time. Lots of people (20+) tested our device in the field, so to say, and ironically, it could be considered a stress testing for our device, though we couldn't measure...
Back to the Directory Entry Structure table: The offset to the cluster is at locations 20-21 and 26-27. The code to support this is: 4550 PRINT " ";:PRINT ((MA(DF+30)*65536)+(MA(DF+29)*256)+MA(DF+28)); 4560 AC=(65536*MA(DF+21))+(256*MA(DF+27))+MA(DF+26)...
To be honest, i started this project because I did not want to pay about $80 for console and shipping to Czech Republic. If I look back, it cost me much much more, but it would not be such a fun & and some frustration. It took me about 1,5 year to finish...
Before I can proceed with the debouncing circuit, I have to evaluate the characteristics of the transistors and choose the lousiest (debouncing is not a critical circuit). Fortunately I had built a board for manually Testing Germanium transistors. Remark:...
"...O frabjous day! Callooh! Callay!' He chortled in his joy."Today I finished porting the code to the Olimex Duinomite Mini board, so now you can have your emulator for about $25 USD (for what we paid upwards of a couple grand in the day), and soooo...
Last time, I talked about how I shifted most of the heavy calculation work for rasterization into the per-triangle preparation, the PreCalc block. In this post I'll walk through some of the steps from formula to implementation.At its heart are the following...
So this is where im at: I've built a couple of prototypes, one of which i got working at some point. intend to upload pictures of the pcbs at least considering i've either scrapped or misplaced the assembled versions. At first i tried to have the games...
It's been a long time since the last log. A lot has happened for me in this time, and there was no room for openSampler in my schedule. I'm typing this on the train to work, so forgive me if this log contains more typing errors than usual. It makes me...
Andreas Kahler joined the room.11:56 AM OK everyone, time to get started. I'm Dan, I'm the mod for today's Hack Chat with Dr. Joshua Pearce from Michigan Tech. He's here today to talk to us about open and sustainable engineering. Joshua, I think you're...
Thursday, 16:41, 15/12/202220/12/2022Sorry for the delay, for some reason my brain refused to work these last 5 days, so I didn't work that much on this project log as I wished to. 23/12/2022 For some reason, it seems like this Project log is so...