303 Results for "《〈 문의 OIO↗5793↗7458 》〉강남초원의집㉩⅓everythingァ강남유흥강남룸㏁evidently 강남초원의집강남더킹 강남더킹‡강남룸Ⅹfaintly㈆"

Window feed-through 2
Log from Window mount for solar panels
This is probably much simpler and cheaper than the previous approach. A 20 x 0,5 mm copper strip is connected to a 4 mm2 standard solar cable with a crimped-on ring ferrule. Everything is protected by a 3d-printed case for isolation and strain relief....

Creating a 3D model
Log from Ultrasonic Music Control
The next step is to create a 3D printed case for the PCB and the sensor. But to do this i first created a 3D model of the hole assambly to thest everything first. And as it turns out it really was a good idea:As you can see i forgot the mounting holes...

Boxing
Log from BeagleLogic Standalone
For packaging the BeagleLogic standalone, I wanted to give the user a complete experience right from the unboxing to the first use. Hence I included everything a user might need to start using BeagleLogic. This includes a set of wires and probe...

3D printed Case and (almost) final assembly
Log from Synthe555er
I designed and printed the case for the Synthe555er. Because of the size, it had to be printed it in two parts. I squeezed everything in the case. In hindsight i should have left some more space between the keyboard, but patience (or violence) is your...

Third revision PCB
Log from Accesible Guitar Tuner
It's finally here, the third revision! With the help of a few contributors, I now have a working input and a 3D printed case!They key realisation was that instead of doing this broken automatic gain stuff it would be much simpler to get an ADC with sufficient...

Build report
Log from Reboot-o-matic
It works!I checked in the watchdog script into the firmware repository. It now uses syslog rather than standard out/err for some rudimentary logging. My recommendation is that you run this from cron every 4-6 hours. You can't really run it more than...

3D Printed Case Idea
Log from Portable Encoding Unit
Here's a realistic 3D printable case idea. Larger than I want for a final design, it will be sufficient for a prototype.It's 4.6" W X 6.2" H X 1.25" D. It would use 3D printed keys as well.There's still a lot of mechanical design that will have to be...

Case
Log from Accesible Guitar Tuner
A friend helped me design this beautiful 3D printed case for the tuner. It looks really pretty, but there are plenty of problems left to solve:How do I smooth the texture? (wilt alcohol, I've heard)How do I make everything fit? (some holes are still...

Ink Cycle finished, what's next?
Log from CIJ Printer
With the auto mode and all the work on hard and software until now, I have finished the ink cycle so that the ink can be pumped around over and over again. So, what's next to do? - The 1 1/4 tubes are made of rusting steel and need to be replaced by...

Window feed-through
Log from Window mount for solar panels
In case the commercial feed-through made from flat copper braid proves too flimsy, I will experiment with a flat copper strip. Here are my thoughts that might be a bit overengineered.It involves two 3d-printed case halves for isolation with a ziptie...

Shipped 3 Best Product Prototypes
Log from Sol BLE Tracker
Managed to finish all 3 prototypes just in time. Testing completed at 7:30AM after working 16 consecutive hours to get the last 2 done. 30 minutes before the post office opens. I have pretty much worked nonstop, every moment of my free time this last...

Hardware
Log from Advanced Alarm Clock
Battery back up good enough to wake up next morning if power goes out in the night. Turn off features to conserve power until alarm sounds in the morning.Arduino on a bread board design for lowest cost and most options.3D printed case holds display,...

IoT Demo Video!
Log from Fall Detector Wearable for Elderly and Clinics
Here's a video demonstrating the Fall Detector Wearable (Particle Core, Spark Core) connected over wifi and transmitting data to various services. You can see a simulated dashboard we created titled "Patient Fall Activity Monitor," as well as my Gmail...

Working 3D case, firmware upgrades
Log from FLipMouse
The 3D printed case works!After a few changes, like too small holes and so on, we have a fitting 3D printed case now.We also altered the mouthpiece, using a cigarette tip (cheaper and easier to buy here).In addition to the new case design, we also updated...

Beggining commercialization for Stack-chan
Log from Stack-chan - JavaScript driven super-kawaii robot
There has been a long time since my last post. But Stack-chan development was never stopped.The number of Stack-chan developers is still increasing day by day and reached 100 on my Twitter list.This time, I decided to make a collaboration with my belonging...

1
2
3
4
5
>
>|