6309 Results for "《 예약문의 OIO↗8489↗8306》선릉가라오케や가라오케추천received가라오케가라오케가라오케사이즈scarcely 청담가라오케иª가라오케사이즈glowing"

Section #6
Log from Apollo Saturn V and LUT
Looking ahead: Only 6 more levels split between two sections remain along with two more swing arms plus the DRRS and of course the crane. The legs and floors from this point on will have to be redesigned to make them lock together better. The vertical...

Colby Crane
Log from Apollo Saturn V and LUT
The Colby crane is the final, crowning achievement of the LUT. The crane is going to be automated in that it will rotate and the hook will raise/lower. Notice that I intended to use the crane model by CristineZ as is but the more I dug...

Hack Chat Transcript, Page 2
Log from The Hoarder's Dilemma Hack Chat
Sam Freeman 3:30 PM Simplify - I try to clean up the tools at the end of the day, even if I know I'll use it tomorrow Saveitforparts 3:30 PM I try (not always sucessfully) to put my tools and parts away before starting another project, but it doesn't...

Hunter dimensions
Log from 3D printed blower
A new used hunter arrived, with enough spare parts to supply the rest of the lion kingdom's renting years. The diameter of the squirrel cage was slightly bigger than the printed one. It's height was much shorter. The leading edges were...

[E3][R] Transparent HMD Options on AliExpress
Log from Itinervate [gd0151]
Realising that I had the simple yet inescapable choice to finally look into a strong and stable life-management system or chaos continuum, I started searching around on Friday 24th Nov when I said to myself "I feel that if I set the budget for the HMD...

Prototyping
Log from Ctrl+Fight!
24/10/23 – Creation of the prototype of the suit for the upper part of the body (see "Prototype_upper_circuit_back" and "Prototype_upper_circuit_front") out of cardboard. We defined the positions of the Arduino card and the sensors. The prototype is...

3rd step : try with an 8x8 LED matrix
Log from 2D LED Ping ball
While waiting for our big LED matrix, we decided that we would try it with only one to begin with. This was, without a doubt, our hardest step, we spent more than 10 hours on this, we tried many codes, and we downloaded many libraries, but nothing seemed...

4th step : Try to make it on the 3x8x32 LED matrix
Log from 2D LED Ping ball
We first tried to keep using the code we have and that works with the small LED matrix by only changing the width and a few other details of the code but that didn't work out. We spent a very long time on this because we couldn't understand why our code...

6th step : keep trying
Log from 2D LED Ping ball
So even after all of our effort we couldn't manage to make it work for our big LED matrix, so we went back to the simple 8x8 one. We then tried to link the speaker to the Arduino board with the LED matrix and the accelerometer, but we ran into another...

Latches on Circuits and Whiskers on Kittens
Log from Shift Register Menorah
Turn on the Light [Chorus]Bend me, shape me, any way you want meLong as you love me, it's all rightBend me, shape me, any way you want meYou got the power to turn on the light -from the song "Bend Me Shape Me" by The Outsiders, 1966 The push-on/hold-off...

First run
Log from CNC Micro coil winder
First run: I couldn't find anything good to wind on. It starts well for the first 10 turns or so then skips and then is all messed up. The movement in the background is the backlash compensation nut on the X axis. (Needs adjustment)The noise is from...

3Ding the PCBing
Log from Commodore CHESSmate Reproduction
I spent the day going over my PCB design, and am beginning to feel more confident about it. As part of this exercise I played around with KiCad's 3D modelling feature. I have to say I'm very impressed. The KiCad library of generic 3D parts it pretty...

Booking It
Log from Commodore CHESSmate Reproduction
On to the next mystery "eureka" reads. A reminder. Number R/W Program...

Manual Intervention
Log from Commodore CHESSmate Reproduction
One thing that I try to do with my projects is to make an authentic looking reproduction of the manuals as well. For instance I was especially pleased with the way that this ZX80 Operating Manual turned out. Making a CHESSmate Operation Instructions...

CHESSmate Lite
Log from Commodore CHESSmate Reproduction
I guess I'm getting a little antsy waiting for the daughterboard PCB to arrive (it has been shipped). To pass the time I thought I would try out an idea I had for a stripped down version of CHESSmate. My goal of course is to make a full blown reproduction...

|<
<
416
417
418
419
420
>
>|