Close

68582 Results for "『 모든문의 OIO=5793=7458 』 선릉셔츠룸㈄ 『 모든문의 OIO=5793=7458 』 Ηcake²셔츠룸테란강남셔츠룸デwriter 셔츠룸테란강남셔츠룸 선릉셔츠룸⒁셔츠룸사이즈┲exhausted⅔"

  • Removing undesired reflections/spots
  • Log     from Open Indirect Ophthalmoscope
  • Hey all!This is another project log to update the latest developments of OWL (Just in case you forgot, we call it OWL because, well, Open Indirect Ophthalmoscope, OIO).So, since the last time I made a log, we’ve been working on--making an elegant GUI...

  • Design Considerations
  • Log     from Open Indirect Ophthalmoscope
  • Earlier version of the device was reconsidered in terms of following aspects:• Accommodating for different refractive errors • Aesthetics • Ergonomics • Weight distribution OIO ASSEMBLY EXPLODED ASSEMBLY1. ACCOMMODATING FOR DIFFERENT REFRACTIVE ERRORS...

  • Donor Cabinet work
  • Log     from Star Trek: The Mirror Universe Pinball
  • 7/29/2013: As I stated; been working on the cabinet for the Mirror universe project. I bought a couple of "project" Bally Star Treks from a fellow pinball collector out of Shertz a few years ago. These have been setting in storage for a while... and...

  • Almost done!
  • Log     from Pick and Place Machine
  • We are frustratingly close to being done. Everyone has been working long hours, and even with the vacations everyone here is feeling a bit exhausted. None the less, we are all very excited about getting this finished, and getting a new video out. Now...

  • Reliability and future usage
  • Log     from Wifi controlled light switch
  • After running for over half a year now, the voltage regulator got a bit exhausted and I had to add a big capacitor to buffer the current. There was also a bug in the code (string concatenation do not work well for bigger strings in node mcu), which caused...

  • Exhausted Material Cut
  • Log     from CNC Plasma Table
  • With the table capable to cut across the width of the material (48 inches), a program was created to act as the final cut to remove the completely cut material from the main sheet.G21 G54 G90X-665Y10 G0Z1.0 G38.2Z-300F1000 G92Z-18 G90G0Z1 M3S10000 G4P1.2...

  • Almost Ready for Selling VESCular6
  • Log     from VESCular6 (VESC6 + Circular)
  • We're almost ready for selling "VESCular6".  15 "VESCular6" have been completed in initial volume and will be officially sold.  If the initial supply is exhausted, you can purchase it in a pre-order manner. For pre-ordering, we receive a certain...

  • Mini Maker Faire Wrap-Up
  • Log     from RoboWillie
  • So this weekend past was the Sydney Mini Maker Faire, boy am I exhausted! We had approximately 5,500 visitors come through the Powerhouse Museum over the two days and going by my voice you would guess I spoke with a good portion of them! I also did several...

  • Alternate monitor in the works...
  • Log     from rhombus
  • I have been working on a rewrite of the monitor. There were a couple of deficiencies which would have impeded development later on. The new monitor uses generic I/O functions for devices, and builds a device definition table in RAM which contains the...

  • sleepy, but determined!

  • Log     from C2-1 "NOMAD"
  • last night i was able to (after many hours of searching" power the robot on with a key command using SERIAL, i haven't had any luck with python, and I'm not sure if jade or turtle bot will work with my mac. I'm exhausted but i figure ill put in a few...

  • Errata
  • Log     from GPS Clock
  • The v5 prototypes have shown some reduced sensitivity on the antenna input. The symptom has been S/N numbers in the GPGSA sentences about 10 dB lower than other units show. Turns out that the problem is caused by a lack of bypassing on the AP2331. I'm...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday