26073 Results for "㉣ 피망바둑 ㈍ rka119.top ㅰ 그레잇게임 ㈖ 사설홀덤 ㆌ 포카치는법주소 ㉫ 노리팡바둑이 ㈔ 배터리사이트게임주소 ㈓ 텍사스홀덤추천 ㈚ 맞고게임추천"

Top 100 of all 2015 Hackaday Prize entries
Log from Analyzing the Hackaday Prize 2015
A quick and dirty Top 100 by copy/paste the projects webpage text, then arrange the data in a spreadsheet pivot tableGrand TotalsAuthors: 672Projects: 910Comments: 3 169Skulls: 7 947Followers: 22 421View Count: 1 544 197Top 100 projects and authors,...

Case
Log from Double Action Keyboard
The case of the Double Action Keyboard V 1.0 is going to be made out of two 1.5 mm stainless steel plates. One will be on the bottom and the other on the top of the keyboard. The edges and the wrist rest will be made out of wood.The steel plates will...

22nd August: They're here!
Log from WildDrone Locator
I am back, and so are the PCBs: Fig. 1: Top (left) and bottom layer view. Fig. 2: Bunch of PCBs. The components will arrive tomorrow. Time to fire up the soldering iron!

Cavity Parameters
Log from EMDrive/satellite
Many people asked for detailed cavity data:Height 24.37mmDiameter 1: 29.64mmDiameter 2: 16.12mmSmall dameter top edge to centre of injector: 5.60mm

PCB TOP Assembled (part 1)
Log from Open Source All-In Drone-Droni SAME70Pi (Kopernik)
I assembled the following parts of the PCB TOP:- the SAME70-M1/M2 circuits- the headers of the xBees- the connector for front sens- the RPi Cams connectors- the Raspberry Pi compute module socket and circuit- the radio Si4464

Fabrication and assembly is underway
Log from Otter Force One
The tubes for suction and the hull have arrived, along with the cut pieces for the device. Brackets, mounts, and structural elements are being 3D printed around the clock. Let’s take a look at what has been created so far: Coupler The coupler routes...

Cold and Hot Water!
Log from Big Old Bus RV Conversion
Got water heater, hooked to extension cord and on top of my mini-fridge in this pic. (Update 2-16-2015)This weekend I moved the water heater to a more secure location on top of the wheel well, while it seems like that may not be a stable location, I...

Final PCB design
Log from LiPo Charger + Boost
The idea was the once I finalized my design, I would order the PCBs from OSH Park.Given the size was 1 inch by 1 inch, it was the most cost effective as I was $5 shipped to Australia.Top layer of my PCB, I have hid the top overlay.Bottom layer of the...

Producing the uRADMonitor - the aluminium enclosure (2)
Log from Global radiation monitoring network
One of the previous posts shared some details on the rugged aluminium enclosure production. You can read it here. It was a long road from the drawing board to the production, but the cases are finally ready. Combined with the rubber gaskets, we have...

Finish
Log from Straight wire and tube stock storage
After it was all finished, I loaded up the stock, and used labels on strings to label the dimensions. I think it is easier to roll if all the larger stock is on one end(I made the pockets that way too) because it is easier to start rolling, and it ends...

Where I'm actually at
Log from Browser-Controlled Tracked Robot
I started this project about 8 months ago. The first thing I tried was to just slap an arduino on top of a Raspberry Pi and attach a motor driver board. In the photo with the chassis you can see the Arduino-compatible (from Watterott) on top of the RasPi....

Finishing Moves
Log from Kitchen Work Table
Taking an inordinate time between glue-up and final product, I finally managed to get the finishing done. You might be able to tell in the photo below that my shoddy joinery is on display on pretty much every corner due to using the wrong tools and being...

Pegboard Marble Run, Part 1
Log from Barb Makes Things
A few weeks ago, I did a build for reDiscover Center that's a big pegboard for a modular marble run. The top of it is too high for the kids to reach normally, so we're creating some elements that will remain fixed up high with a couple mechanisms to...

Acrylic case
Log from LEDBrick Reef Aquarium Lighting
Spent some extra time on the outer acrylic enclosure design - all the intake is on top, and the exhaust vents have been extensively restyled with a nice wave motif.Laser cut from 1/8" acrylic.Also added a fan shroud to prevent internal air recirculation...

Fancy Shelf
Log from Santa's Shop
We couldn't accept just "plain old square" shelves, so we decided to build a wall mounted open box with a rounded top.With the usual items; wood, screws, drill we added a 3d printed top.This made things more interesting and the structure begins to take...

1
2
3
4
5
>
>|