Close

22932 Results for "《〈 문의 OIO↗5793↗7458 》〉 셔츠룸ヒ 《〈 문의 OIO↗5793↗7458 》〉 ㎛beforehandム셔츠룸후기셔츠룸후기╇pen 선릉셔츠룸셔츠룸가격 셔츠룸‰강남셔츠룸㉦nestㅳ"

  • Removing undesired reflections/spots
  • Log     from Open Indirect Ophthalmoscope
  • Hey all!This is another project log to update the latest developments of OWL (Just in case you forgot, we call it OWL because, well, Open Indirect Ophthalmoscope, OIO).So, since the last time I made a log, we’ve been working on--making an elegant GUI...

  • Design Considerations
  • Log     from Open Indirect Ophthalmoscope
  • Earlier version of the device was reconsidered in terms of following aspects:• Accommodating for different refractive errors • Aesthetics • Ergonomics • Weight distribution OIO ASSEMBLY EXPLODED ASSEMBLY1. ACCOMMODATING FOR DIFFERENT REFRACTIVE ERRORS...

  • Pen Holder v1
  • Log     from plotbot
  • I made a simple pen holder out of brass strips, it is a parallelogram with plastic washers as bearings. A tension spring is used to ensure the pen has always contact with the paper, and a mini-servo is used to lift and lower the pen. While working okayish,...

  • First Print

  • Log     from 3D Printable Stroke Victim Writing Utensils
  • Some stroke patients can hold onto a ball, but not a regular sized pen. So the solution is to put a ball onto a pen. The large surface area of the ball allows for weak fingers to hold onto the pen. I used tinkercad to create a 50mm sphere with a 9mm...

  • prototype 0.5 and 1
  • Log     from Sequino
  • the first two prototype was just figuring out the frame and kinematics . I didnt want the the pen to have any kind of ugly wires hanging outside which would be the case had i used a normal solenoid or a servo to lift the pen. To avoid that i used a h-bot...

  • Feeder
  • Log     from brdMaker
  • Gear now uses 1.2mm x 20mm nails. Just flat head is cut off with side cutters. With correct size of hole, pins are easy to push in into correct depth. Little screw locking is applied into hole beforehand. Ordered some HAL sensors from TI. When arrives,...

  • Super Fat Pen
  • Log     from 3D Printable Stroke Victim Writing Utensils
  • Many people who have aphasia cannot grip a tiny pencil. A common adaptation to a pen, pencil, or artist's paintbrush is to fatten it up to make it easier to grip. This 40mm x 150mm cylinder has a 9mm hole in the middle to hold a standard "Bic" pen. It...

  • Hackaday fail #1
  • Log     from SACO LED Display
  • How not to make a spot welder penMy first attempt at making a spot welder pen has failed.I bent the electrode ends of my existing spot welder pen inwards, then smashed them flat with a hammer and flat-end punch until they were about the thickness of...

  • Final design- Prototype 2
  • Log     from Mechanical Laser Show
  • Since prototype 1 I made the following improvements:Actuating nose of pen instead of butt because the nose is lighterHand crank on opposite sideCams facing forwardScrews have less threads per inch for easier printingCam design Cams are now designed by...

  • Finally working!
  • Log     from Wac0m Rip0ff : Wacom I2C hacked!
  • I finally make it working (at least on Windows 10). I already committed to my GitHub, so the latest code is now working! Also, I'm now understanding the way to report the correct hid event, so let me guide through. the number in parentheses corresponding...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday