Close

26075 Results for "↘ 최저가 Ò1Ò〈⑻⑷89〉83Ò⑥ ↗ 강남쓰리아워F グpossibility쓰리아워┃쓰리아워가격쓰리아워레깅스룸Iシ쓰리아워레깅스룸unnatural 쓰리아워ы쓰리아워레깅스룸㏅㈇temper"

  • Project Log 64: DIY Linear Actuator.¹

  • 21/07/2023, Friday, 10:16. For some reason this last week got me too lazy to do anything at all... Well, I will just leave this here and see what I can think of... ----------------------------------------------------------------------------------------------------------...
  • SD Cards - PSoC to Z80

  • Now that we can read SD cards and have an I/O interface in place from the Z80 to do I/O mapped access to the SD card it's time to hook the two pieces together. To do this we will need to look closer at how Grant's code request blocks.  The loader...
  • Momentary Lapse Of Reason

  • I may have upset Hench a little. I dont usually lose my temper with him, despite our differences of opinion, but after the tabloid I chose to bust this story open declined to even contact me [Hello, The Sun. Really helpful of you, thanks] I was already...
  • Iron man suit overview

  • With energy, there are multiple things to look at when choosing materials. The main thing to look at for today is PSI and heat resistance. The material I choose will need a high level of both. This is due to the way the reactor works. After searching...
  • Frequencies

  • For some reason the 47 pF value for the caps is sitting in my mind. Either after 'calibration' the LC meter is so far off that it read both my TI-89's and my V200's caps 51 pf, both ~8% high, or both of them are within their 10% tolerance and reading...
  • Parity with Fibonacci

  • One thing that sets PEAC apart from the Fibonacci and Pisano series is the parity, or mod 2 remainder. When you take the natural sequence 0, 1, 1, 2, 3, 5, 8, 13, 21, 34, 55, 89, 144, 233, 377, 610, 987, 1597... The mod 2 is 0, 1, 1, 0, 1, 1, 0, 1, 1,...
  • Z80 (CP/M) Writing to SD Card

  • Digging into SD card writes means shifting gears from the Boot BIOS source code since the Boot BIOS code only does reads. The CP/M BIOS code (CBIOS128.LST) which does the reads/writes after booting. Here's the BIOS code for writes to the SD Card: 0754...
  • We get signal

  • Indeed, immediately after running the Windows software in a VM with the device connected I was getting a live data log of the CO₂ concentration! This screenshot shows me breathing into the vicinity of the sensor:Ok, time to disconnect the device from...
  • Finally, some publicity!

  • An article recently published on MOONGIFT, a Japanese developer site, has showcased RasDash! The article is entirely in Japanese and Google Translate won't accept the URL as it has special characters but YANDEX does. Below are some links and a basic...
  • It's like being in college again.

  • Mid-day update: April 20, 89 PDWhile over 75% of the internal parts are finished printing, but there is still too much to do. We have started wiring up the reactor with LEDs but it is slow going (25% done). We have not even started on the code to drive...
  • MORE RADII!!

  • I haven't putzed about with the v0.1 base at all, but I think I've got a motor mount design that I like. It's got the split bolt setup for securing the motor (including a cutout for holding a 2-56 nut), and the legs are cool lofted dealies. Lots of radii...
  • Fibonacci

  • With the ALU verified and the RAM connected, today the breadboard determined that the first 8-bit Fibonacci number is 144. 0000 0000 ld $00 ; outer loop 0001 c200 st [$00] ; a=0 0002 0001 ld $01 ; b=1 0003 fc0a bra $0a 0004 0200 nop ; (pipelining) 0005...
  • MIKBUG Commands

  • MIKBUG (Smithbug) has the following case-sensitive commands. ; V VIEW MEMORY; E CHANGE MEMORY; M MOVE MEMORY; I FILL MEMORY; F FIND  ; D DISASSEMBLE CODE; & S1 LOAD PROGRAMME; G GO TO PROGRAM; J JUMP TO TARGET PROGRAM ; T TRACE PROGRAM; K CONTINUE...
  • All Your ISA Belong to Me!

  • Before I began the layout of the DDL4-CPU, I came up with an initial Instruction Set Architecture (ISA) for the design. It went through several revisions as I was designing the boards and refined the components. Here at the last minute as I am...