2193 Results for "3D printing"

8/12 - 3D Printing
Log from Modular USB Hotkey Controller
Today we finalized the magnetic connector design and started printing the module bases. We also started soldering the keypad module.

3D Printing
Log from Affordable bionic prosthesis
With over 20 3D printed parts, this was a long process. The printer used is an Anycubic Kossel Delta. 0.15 mm layer height. Just regular PLA+. Different infill and parameter configurations for different pieces.Overall printing time was about a week....

3D Printed Lancing Tools
Log from Hospital + Makerspace Initiative
August 8, 2017 | ProgressTH Lancing tools are used for breaking open blisters and sores, and in this case, breaking only one to take a sample for diagnosis. We don't really think that 3D printing is good for this application, but the national children's...

3D Print Raaco Handybox Inserts (A9-1)
Log from Parts Boxes
At first, I bough extra compartment inserts. But realized shortly after getting my first 3D printer, that designing and printing my own was going to be cheaper and quicker. The dimensions of the smallest box are specified as 39mm wide x 55mm deep...

3D Printing the Mechanical Coupling
Log from Proxxon MF70 CNC Conversion
The plan for the mill is to temporarily convert the X and the Y axis to CNC control using 3D printed parts. Then I should be able to use the 2 axis cnc to machine the final axes conversions. I have got temporary access to a Makerbot 2X which does a great...

Now in 3d, the Return!
Log from Science Tricorder by Olympus Heavy Industries
Gotten a lot further along with the 3d shell, the primary parts are at least mostly done and I'm working on test-printing and fine-tuning stuff now. The big things left are getting the interface panels for the body and door further along. The main body...

3D printing and GrabCAD
Log from TOME - Portable 3D Printer
I was able to 3D print the nut retainers today and they came out great, still need to order the Shapeways parts to really put the entire assembly together. I'll be kicking that order off this Friday and will have enough components to get the Z-axis together...

3D printed case
Log from FLipMouse
As it is much more common to have a 3D printer at home instead of a laser cutter, we developed a 3D printed version of the case. It might be more expensive than the lasercut case, but it is much more convenient, especially if you want to assemble the...

Desing & 3D printing
Log from DNA Wind Turbine
The key design considerations were that the product needed to be cheap, easy to fabricate & easy to transport. This ruled out the possibility of building a single, large turbine.The finally settled on this design.In the center you can see a hole. The...

3D modeling the scope
Log from Internet of Things Microscope
*Update from Apollo on the 3D design and printing* I have designed the prototype base and pi mounts in Auto desk fusion 360. The picture below shows the part in Fusion 360 and in the slicer program Cura (3D Slicing Program). I have already printed a...

3D printed brackets
Log from [ModAir] Monochrome LCD Modules
I designed some supporting brackets to sandwich the LCD Module to the PCB. Standard 0.1" female header pins were used on the PCB side, with the male header pins on the LCD side. This brings the PCB separation to 11.0 mm. With 1.6 mm PCB thickness on...

Designing Parts for 3D printing
Log from 3D Printed Raspberry Pi Security Camera System
STL's for CameraThe Lankford Group's 3D HubIn the above link you will go to my thingiverse page and be able to download the files to 3D print this object. If you do not have a 3D Printer you can go to 3D Hubs and order from my hub or from a hub closer...

Rejuvenating my 12 year old 3D Printer
Log from RETRO 1 - Home Computer Console
I have an old 3D printer, an UP3D mini to be specific. It has a build volume of just 10cm x 10cm x 10cm. That's pretty small by modern standards.Additionally, the bed-heater is fixed at 60 degrees centigrade and in it's original factory state, it only...

3D-Printed Parts
Log from ROVER-X
My first assignment was to print the 3D needed parts. I used my Prusa MK3s and Red and Black PLA. I printed 'ALMOST' all the parts from the .stl files posted by Roger. However, I used some variations: Mirrored Parts: I printed the 4 corner...

3D Printing Parts Instructions
Log from 3D Printed Raspberry Pi Security Camera System
I will try to be clear and concise in these instructions to help you have a successful print the first time. I have placed the pictures in the top bar in the order of the download on the Thingiverse page. I will also have the instructions and names in...

1
2
3
4
5
>
>|