Close

22780 Results for "《〈 문의 OIO↗5793↗7458 》〉 셔츠룸후기た 《〈 문의 OIO↗5793↗7458 》〉 ⑷plenty㎋셔츠룸후기셔츠룸후기んteeth 셔츠룸후기선릉셔츠룸 강남셔츠룸￦셔츠룸ⓤsilverⓞ"

  • MONEY (part 2)
  • Log     from LadyBug BEEFY: 3D printer motorized microscope
  • Wow, so I've got 3 followers, now, nice! Hooray for Reddit!I mentioned before that I had a scan of 17,000 images or so. The truth is, that's actually five scans of 3000-odd x/y scans each, just at different Z heights. The purpose of that is to eliminate...

  • A Rock Solid Heated Bed
  • Log     from Fixing Up the Monoprice Select Mini
  • 0° to 60° in 3 minutes flat. Out of the box one of my biggest issues with the MPSM was the heated bed. After mild use, it quickly warped, was unable to warm up, and had uneven heat distribution. One of the quick fixes that many people do, including...

  • Solve for Gen X
  • Log     from Tardygrade
  • I did study some math while at university. But like many (most) of my compatriots I didn't learn math so much as I learned how to take exams. I've since lived under constant threat of that laziness coming back to bite me. Even one of the issues...

  • Project status
  • Log     from T^2 Tiles [gd0095]
  • This is the concept model of one of the tiles. The frame is 4040 alu extru and the motors are all Nema 14 except for the N23. The front tile is a 256x256mm LED matrix and the back is an array of COB leds for backlighting effects. One of the main positions...

  • [A][R] 13:1 and Tooth Profile Research
  • Log     from T^2 Tiles [gd0095]
  • I was looking at harmonic drives on AliExpress (to see how my £4 hypothetical solution measured up) and I've just realised that I've actually modelled a 13:1 reduction, not 14:1 as intended. I'd need efficiencies of >77% to obtain 10x torque. I've...

  • Tripod Gait Working
  • Log     from Stubby the (Teaching) Hexapod
  • Stubby v3 will be controlled similar to a video game: use the left stick for forward / backward / strafe right + left, and use the right stick to turn.  So far, I have the left stick working properly, using a straight tripod gait.From an implementation...

  • Version 5 Final Version?
  • Log     from Raptor12 Wireless AC Dimmer
  • There seams to be some variation in the nrf modules The cheap $1-2 ones are off set to one side of the pin header. While the PA($10-30) aka: amplified version has the same width but it is centered rather than offset. So now my layout has 2 sockets that...

  • MEMs Microphone PCB Design
  • Log     from DogEars
  • So I've been beavering away on designing the first PCB for this project, a MEMs microphone and preamplifier board, this pcb will hopefully fit into each headphone, so I've designed it to be reasonably small.  I'm sure I could of gone smaller with...

  • Final Assembly
  • Log     from Vectr - 3D Gesture Controller and Sequencer
  • I've been working at maximum capacity getting units ready to ship to Kickstarter backers. It's been kind of insane. I've got a vacation coming up and I'm trying to get about 45 of these built before I go. The first build is always the hardest. Some of...

  • It's Alive!
  • Log     from OpenBarbell
  • Shoebox prototype #1 is complete! The measurements are very consistent, and the hardware is showing great promise. There were a couple issues that will be worked out before the end of the week, but we are getting (probably) accurate velocity measurements...

  • Overbudget :(
  • Log     from CNC desktop laser/dremel mill/microscope
  • Seems that I am going overbudget. The initial goal was for doing this "undrer 300 EUR" but the material costs before laser cutting will be pushing me up to 325. With the laser fees added I'm hoping to fit within ~350 EUR for the machine with the pen,...

  • Status for June 02
  • Log     from Improve the Haber process
  • Current status:1) Software development of the controller board is coming along2) Measuring frequency and pulse width on an Arduino at 30kHz is a hard problem3) ...but I think I have it sorted with some additional hardware. Adds a dime to the build cost.4)...

  • Spatium Gestu lives
  • Log     from Spatium Gestu
  • This is the EventManager debug output after running for some minutes capturing data. --- bootstrap_completed yes --- scheduler present? yes -- location of message_defs 0x00011b0c -- Queue depth: 0 -- Preallocation depth: 7 -- Total subscriber count:...

  • Installing Sensors
  • Log     from Vinduino, a wine grower's water saving project
  • This week, I installed extra gypsum sensors., and got a 4G WiFi hotspot for Internet access in the vineyard.Connecting to the ESP8266 WiFi module works fine. Tried DSL last year, did not work as the latency and slow speed was not usable., even for IoT.Pictures...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday