Close

2145 Results for "3D printing"

  • Pulser-sequencer
  • Log     from Clockwork germanium
  • Remember the last logs : the goal is to use as few transistors as possible to send a string of consecutive non-overlapping pulses to several pass-gates. Here the design uses NPN as primary type but it will be reversed later because PNP are the majority...

  • Climate Change Hack Chat Transcript
  • Log     from Climate Change Hack Chat
  • Tito Jankowski about me: I've been a biohacker, a hardware manufacturer, a medical device designer, a patent infringer, and a sailor. Prior to launching Impossible Labs, I co-founded the BioCurious hackerspace, built an open source biotech device called...

  • Hack Chat Transcript, Part 3
  • Log     from DIY Radio Telescopes Hack Chat
  • Joseph Eoff12:45 PMWhile we're on the subject of data, is there standardized format for collecting data and metadata? Frank12:45 PMfor example I might build a station out of curiosity, but then it may lie dormant for days or weeks while my real job...

  • Hack Chat Transcript, Part 2
  • Log     from Animatronics Hack Chat
  • Will Cogley12:36 PMwould the object being touched need to be conductive though? Yeah, and it'd get pretty grubby pretty quickly Matt Michalka12:36 PMhttps://singularityhub.com/2019/06/03/these-10-sensor-packed-gloves-could-give-robots-a-sense-of-touch/...

  • Eagle: One Year Later - Transcript 1
  • Log     from Eagle: One Year Later
  • Sophi Kravitz : Matt B, please tell us who you are and why you are here Sophi Kravitz : :D technolomaniac : ok...hi. Im matt - aka technolomaniac...I run the EAGLE, Tinkercad and part of the Fusion 360 teams at Autodesk. technolomaniac : before that,...

  • Hack Chat Transcript, Part 3
  • Log     from Autodesk Fusion 360 Hack Chat
  • technolomaniac12:22 PM@Prof. Fartsparkle not yet. this is in the cards. personally I would throw the whole renderer out and start again and well...I make that call. so yes, we will do that. Prof. Fartsparkle12:23 PMoh that makes me very happy technolomaniac12:23...

  • Hack Chat Transcript, Part 3
  • Log     from Software Defined Radio Hack Chat
  • Joyce12:53 PMHiya! James Finch12:53 PMWay more complex when getting into the microwave range. Just watched a Keysight presentation noting how every section of a circuit in a system has to be studied to understand the affect... where I perceive is like...

  • Hack Chat Transcript, Part 2
  • Log     from Open Hardware Month Hack Chat
  • (https://certification.oshwa.org/process.html) John Loefler12:29 PM@Michael Weinberg And isn't the new US law that it is the first "inverntor" to patent not "person". if you are the first to put it in the public domain isn't that prove you are the inventor...

  • Hack Chat Transcript, Part 2
  • Log     from Laser Artistry Hack Chat
  • riley.august12:42 PM@Seb Lee-Delisle Sorry, I've been a little slow to keep up. Okay, so it's actually the same kind of interlock we use on ours, but our industrial lasers are connected to a tilt switch. So yours are connected to the estop signal pin,...

  • Hack Chat Transcript, Part 3
  • Log     from Citizen Science Hack Chat
  • Kendall Meade12:46 PM*either Peter Bosch12:46 PMif you mind your safety precautions, you can do quite alot safely. for example: me and some people at the local hackerspace made RFNA for decapping chips, which would be pretty dangerous if we hadn't thought...

  • Schematic and Operation
  • Log     from HydraMETER
  • The schematics are done!  I kind of want to do a video going over the design process as this has evolved over what's now several years, there have been a ton of changes to everything.  For now I'll throw some (slightly) better explanations...

  • Hack Chat Transcript, Part 2
  • Log     from Industrial Design Hack Chat
  • Pablo Oyarzo12:23 PM@Dan Maloney Eric OFC, Sam Zeloof , maybe Adam Savage?? and Simon Giertz Erin RobotGrrl12:23 PMDid you work at a design firm before making your own company? Which do you like more? Eric Strebel12:24 PMnice, i would like to meet some...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday