August 8, 2017 | ProgressTH Lancing tools are used for breaking open blisters and sores, and in this case, breaking only one to take a sample for diagnosis. We don't really think that 3D printing is good for this application, but the national children's...
At first, I bough extra compartment inserts. But realized shortly after getting my first 3D printer, that designing and printing my own was going to be cheaper and quicker. The dimensions of the smallest box are specified as 39mm wide x 55mm deep...
The plan for the mill is to temporarily convert the X and the Y axis to CNC control using 3D printed parts. Then I should be able to use the 2 axis cnc to machine the final axes conversions. I have got temporary access to a Makerbot 2X which does a great...
I was able to 3D print the nut retainers today and they came out great, still need to order the Shapeways parts to really put the entire assembly together. I'll be kicking that order off this Friday and will have enough components to get the Z-axis together...
I designed some supporting brackets to sandwich the LCD Module to the PCB. Standard 0.1" female header pins were used on the PCB side, with the male header pins on the LCD side. This brings the PCB separation to 11.0 mm. With 1.6 mm PCB thickness on...
STL's for CameraThe Lankford Group's 3D HubIn the above link you will go to my thingiverse page and be able to download the files to 3D print this object. If you do not have a 3D Printer you can go to 3D Hubs and order from my hub or from a hub closer...
I have an old 3D printer, an UP3D mini to be specific. It has a build volume of just 10cm x 10cm x 10cm. That's pretty small by modern standards.Additionally, the bed-heater is fixed at 60 degrees centigrade and in it's original factory state, it only...
The first two pictures are showing the results of printing a 8mm x 8 mm x 2 mm cube. On the third picture you can see some of the first exposing experiments.
Designing the Enclosure :This was the most time consuming step for me.I have spent around 4 hours to design the enclosure. I used Autodesk Fusion 360 to design it. The enclosure have two parts : Main Body and Front Cover The main body is basically designed...
This log will be a repository and notes for 3Dprinted parts that I have designed for use in the prototyping and even early small run production for the UFARM Robotics Project.Grow Light Hanging ClipThe grow light hanging clip was necessary to provide...
While measuring the collets for the collet box build I had this silly idea; why not attempt to measure them as accurately as possible, and then make a 3d printed blank "emergency" collet? Plastic collet blanks are available so this is not a totally insane...
Hey all, @davedarko writing. As you might have seen at the #Hackaday | Belgrade event - I've brought my Tote with 3d printed legs along to the workshop. There I was asked for the files and @Radomir Dopieralski told me I could share them in a log. It...
There are jackets with solar panels on them currently in the market. But they all have the solar panels flat on the back. Does it actually collect enough sunlight when they are vertical? I wanted my solar panel to face the sun. Since this would make...
So in a similar design vein to the programmer's converter dookickie I made a little while ago I decided to design a little bottom shell to house the bare pcb. For simplicity's sake I wanted to have a friction fit with no glue or fasteners required. To...