Close

27084 Results for "《 예약문의 OIO≡⑧④89≡83O⑥》레깅스룸견적よ레깅스룸ago레깅스룸メ강남레깅스룸eighty 선릉레깅스룸κ선릉레깅스⒲레깅스룸メｃ선릉레깅스룸literary"

  • Mystery of Green and Blue light
  • Log     from Automatic Diet Tracker
  • I know the title sounds really mysterious, but just have a look at the gathered data.(Date Time R_max R_min G_max G_min B_max B_min Ir_max Ir_min)2014/8/23 0:39:55 55 49 1 0 1 0 25 22 2014/8/23 0:59:1 84 73 2 1 1 0 47 41 2014/8/23 9:7:35 97 87 3 1 2...

  • Deep Sleep
  • Log     from ESP8266 Native
  • I've been testing the deep sleep mode on the ESP-03. I loaded the frankenstein firmware from here https://github.com/nekromant/esp8266-frankenstein onto the module to test the deep sleep mode.Note, you need to tie gpio15 to GND in order to boot any firmware...

  • muahaha, I cheated :)
  • Log     from Game Boy Cartridge plus Programmer
  • So since the Teensy++ 2.0 bootloader is not available and I'm not feeling comfortable to learn all the bells and whistles of USB communications I was looking for other options. Googling "at90usb1287 arduino" I found this https://github.com/mattairtech/ArduinoCore-avr...

  • Reverse Engineering from Package Data
  • Log     from Reverse Engineering a Drone
  • As you can see airodump-ng picked up the WiFi of the drone and also that it is running on channel 2. Next I recorded some packages. sudo airodump-ng -w JJRC_out -c 2 -bssid 10:A4:BE:2E:77:B5 wlan0mon While recording I simply used all the functions the...

  • More sieving
  • Log     from PEAC Pisano with End-Around Carry algorithm
  • Let's go back to logs 139. Heuristic breakthrough and 140. gPEAC to 1 million.  Now that the gPEAC inner loop is optimised, it's time to build the distributed scanner to hack through a mountain of numbers... It should be faster with the optimised...

  • Instruction Set Shuffle
  • Log     from Hardware Controlled 4 bit CPU
  • Instruction Set Shuffle Having ADD and SUB in different op code pages seems wrong, as SUB (ACC = Value - 1) can be coded as: LOAD ValueXOR FADD 1XOR F Yes, the carry flag works. The current op code set would be: LOAD ValuePAGE 8SUB 1PAGE 0 No saving!...

  • More Power Igor
  • Log     from Cardware
  • Well, finally I was let down by a lack of amps, the batteries I have just arent strong enough to move the limbs without at least doubling them. And I'll need to upgrade the regulators. Such is life...I added a little bit of code to the Pi's monitor....

  • The resistive touchscreen
  • Log     from Portable environmental monitor
  • July was a tough month, and August is no different. Due to some components arriving late, I've only been able to start my work on the Hackaday.io project with considerable delay. So I had to catch up with everything and squeeze the entire development...

  • More Peripherals and some tablet bytes.
  • Log     from WiiChuck
  • The amazon fairy dropped off a "NES Classic Controller" and a "Classic Pro"The classic pro comes up as a classic controller, The only difference is the analog R and L on the one I have are buttons and just return the max value when pushed. Although this...

  • Success!
  • Log     from Voyage 200 Upgrades
  • So, the results are different than expected, but that is just fine. I'm running my V200 at 2x the speed it came from TI. For those who are TL:DR with my logs, you need a 1.21 kOhm resistor and an 18 pF capacitor. I never ran the MD5 checksums as I didn't...

  • LOC build
  • Log     from Medical tricorder
  • Microscope slides, 3-D printed parts and the finished test-tube-shaped micro reaction chamber. 2-component 5-minutes epoxy resin adhesive has been used to glue the microscope slides and nipples in place:Leakage test (pass):Populated PCB:Reaction chamber...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday