45099 Results for "《〈 문의 OIO↗5793↗7458 》〉강남초원의집㉩⅓everythingァ강남유흥강남룸㏁evidently 강남초원의집강남더킹 강남더킹‡강남룸Ⅹfaintly㈆"

Challenges
Log from 100% reusable electronics
Evidently as with every new idea comes unexpected twits and challenges.Cavity plate materialThe first time I tried this process I picket the wrong material for the cavity plate.So far I have presented the idea in the next phase of this project, the implementation...

The PCBs have arrived
Log from xmas_v2
Yesterday I have finally received my completed PCBs from ITEAD Studio! They are kind of rough around the edges, but they appear to work. I also received an additional 9 boards, from my 20 board order.During the time since the last update, I have received...

Reworking two prototypes
Log from Arduboy MAX
Not sure what has happened when I soldered the boards, but I never really got them to work properly. I just spend an hour on reworking and cleaning a board, but I've must have killed the chip doing that. Before it was accepting the bootloader, but now...

devLog[0]
Log from Handheld Raspberry PI Retro Game Console
Hey guys! Welcome to my first project log. Last night I purchased all the parts needed to make this project, and they should arrive in the next few days. You can check out the parts list to see everything I ordered, and I'll put up links to everything...

Everything tested
Log from Portable 100W led flashlight
Found a good heatsink and got almost all components.Still waiting for some boost converters from china.The led was first secured by wood.Now i am using alu plates and long screws.Everything holds together and won't fall apart anymore ;)Next step: waiting...

Day 2: Logging
Log from Heimdalr, Multi-Mead-Watcher
On the second day I worked on my first Spark core app. It read data from an analog device (a temperature sensor, in this case) and exported the data through the native REST API. Amazingly everything worked fine on the first try. Then...

Random Update
Log from S500 Quadcopter Build
Hey so this project hasn't been abandoned it was just put on the backburner because I cheaped out and bought everything from china, turns of the PCB was garbage, so I bought an authentic one from hobbyking. At some point I'm going to completely disassmble...

Version 1 out for fabrication
Log from Open Source Laser Power Meter
I have sent out the first iteration of the design to OSHpark for fabrication. I wanted to get it out the door to have a basic meter available as quickly as possible. My available time will quickly go to zero once August arrives. I added one pull-up resistor...

Release date delayed
Log from hackOx
We're sorry but as you all may have noticed we couldn't release hackOx on the planned date. We thought everything would be ready (core software, modules, apps, documentation, etc) but since we're all studying and/or working we just didn't have enough...

Perfect (sorta) V3 Boards
Log from Wireless BLE Kinesis Advantage (Custom Controller)
Soldered everything down and everything is functionally perfect. Only minor issue is I forgot to remove "i2C Pullups" from the board silkscreen but other than that, the boards are good to go. I actually still have 4 spare since the first one worked...

V1.1.1
Log from Raspberry Pi EVSE Hat
everything on this board works, so far as I can tell. I was able to write some python to force the relay out line low, toggle the GFI clear high briefly, then turn the relay out line on and toggle the watchdog line at 1 kHz and the little relay light...

Prettyfication and convenience
Log from RC5 Madness
I've been testing the whole setup on a breadboard for a few days now and everything works as intended. To do: keep track of the on/standby state in either esphome or Home Assistantsolder everything upmake a new RCA/chinch cable

Hack Chat Transcript, Part 2
Log from PCB Thermal Design Hack Chat
Mike Jouppi12:55 PM Mike Jouppi12:55 PMOk, here is the board stack up Sven F12:55 PMOK, thank you very much. Your links are already helping me! Do you know any surface mountabe heatsinks manufacturers, too? So far I used some BGA-heat sinks and mounted...

had to rebuilt the 3D files
Log from Locomatrix - 3D POV - a different approach
turned out that my files could not be exported or reopened and I had to rebuilt everything. I'm gonna send the files to my boss and he will hopefully print them and send it to me by the end of the week.

PEP8
Log from KAPCOM
Doing some code cleanup and migrating everything to use Python's logger module and PEP8 formatting. I cleared out some of the more confusing bits of code and fixed a bug or two. Keypress buttons are now working again, so that's nice. Fly-by-wire no longer...

|<
<
2
3
4
5
6
>
>|