Close

15213 Results for "《 예약문의 OIO≡⑧④89≡83O⑥》레깅스룸견적よ레깅스룸ago레깅스룸メ강남레깅스룸eighty 선릉레깅스룸κ선릉레깅스⒲레깅스룸メｃ선릉레깅스룸literary"

  • Firmware
  • Log     from Cartoon Digital Clock With Switchable Style
  • Define the resolution of the screen.static const uint16_t screenWidth = 240; static const uint16_t screenHeight = 240; Then set the drive pin , the TFT_BLK , and touch pins according to the schematic diagram.#define TFT_BLK 7 #define TFT_RES 11 #define...

  • Simplification
  • Log     from Bootstrapping a ROMless Z80 using RS-232
  • I’ve been thinking more about initialization, and I think that it is sufficient to initialise A, and leave initialization of everything else to the first boot program written to RAM. Then write a second boot program (i.e. any 256-byte program) after...

  • More simplification
  • Log     from Bootstrapping a ROMless Z80 using RS-232
  • Here is a simpler scheme. Rather than connecting RS-232 TxD to /NMI, it is connected to /RESET, and this is used to reset the CPU whenever HALT is reached. This scheme assumes that all registers except PC (and I and R) are preserved on RESET. The following...

  • Setting Up the Compute Module 4
  • Log     from Raspberry Pi Computing Cluster
  • We set off building a compute cluster using the Raspberry Pi Compute Module 4 for its smaller form factor and higher customizability.  CM4 with WaverShare's CM4-DUAL-ETH-MINI Day 1 - 3 5 Jan 2024 - 7 Jan 2024 Set up and Flash the CM4 EMMC...

  • The strength to pull out the sword.
  • Log     from Escalibur
  • The sword, motors : The goal of our game is to release the sword locked by a structure. For this structure to activate, all three LEDs associated with each stage must remain lit simultaneously. We encountered an issue that prevents it from working, which...

  • The final EscaliGame

  • Log     from Escalibur
  • To conclude, our project was long and challenging. It's important to note that the four of us had almost no prior experience with Arduino and were not familiar with this type of project. Despite this, we are still satisfied with our result, although...

  • Preface
  • Log     from REST: Kitchen timer
  • There was a simpler time when I was having this sudden urge to pay a visit to our local flea market for different stuff, which usually ended with me going home with such stuff - namely some electronic parts, enclosures, etc. That is how i ended up with...

  • Keeping time
  • Log     from REST: Kitchen timer
  • I think I've got basic controls and operation modes, and I guess.. there isn't much more too it?It has slow animation mode (when it has more than 1 hour set). Also indicates that HH:MM (hours over and minutes under) format is active by two rectangles...

  • Analog Front End
  • Log     from Pomelo: Gamma Spectroscopy Module
  • SiPM pulses have fairly large amplitudes so don’t need a lot of amplification, but they have fast rise-times below a few ns and decay times in the range of hundreds of ns. The figure below is an example pulse provided in the Broadcom AFBR-S4N44P014M...

  • Keyboard Modifications
  • Log     from RETRO 1 - Home Computer Console
  • The Perixx PS/2 keyboard suggested in the Parts List (PERIBOARD-409) is built to be used on desk and as such has a nice casing already. However, we want to put it in our custom case, where only the top will be visible. So, we need to : Place the keyboard...

  • Hack Chat Transcript
  • Log     from Biomedical Engineering
  • Dan Maloney  3:00 PM OK, welcome everyone, let's get started. I'm Dan, I'll be modding today along with Dusan as we welcome Nyeli Kratz to the Hack Chat. Today we're talking about biomedical engineering. Walter Lite  3:00 PM hi dan Dusan Petrovic  3:01...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday