When I set about this project the first thing I wanted to work out was what LED I was going to use, as this would drive the requirements of everything else in the project, driver, lens, heatsinking, etc. Due to personal preference I decided that I wanted...
Looking at the registers I noticed something. the first 24 bytes look like they have data and the last 6 bytes look like they have data. This looks like what a WII peripheral in encrypted mode would look like. The fixed 8 byte pattern repeating every...
On my TI-89, one of the battery contacts on the PCB was heavily corroded and it took a good deal of time and heat to reflow solder to make a new pad. I did this to the V200 as a preventative measure too, but I guess I heated up the nearby fuse to where...
Had to dig into the FPGA code for the SD card. Using Neal Crook's documentation of Grant Searle's version (longer pedigree on the page). The status register values are: // SD_Status bit values from Neal Crook's documentation of Grant's SD card // b7...
I'll go over the code in chunks. Instead of pasting it here, please open up the bitbucket repo or the .ino file in an IDE and follow along with the line numbers.Lines 1-30: Basic declarations and includes nothing special here.Lines 32-89: This is our...
I experimented a bit with the v2.2.0 vocabulary, and I quickly missed the DO .. LOOP structure.Figuring out how DO .. LOOP should work took some time: after testing some Forth implementations, I decided to stick with the ANS Forth specification (STM8EF...
Wrote a very basic command interface with three commands:W - Write the EEPROMR - Read the EEPROMB - Bounce an LED across the RPP-UIO-16 cardThe result looks like this:Write to the EEPROM Read from the EEPROM 0000 00 01 02 03 04 05 06 07 08 09 0a 0b 0c...
As you can see airodump-ng picked up the WiFi of the drone and also that it is running on channel 2. Next I recorded some packages. sudo airodump-ng -w JJRC_out -c 2 -bssid 10:A4:BE:2E:77:B5 wlan0mon While recording I simply used all the functions the...
With the new harvest, I estimate that the perfect and maximal orbits under m=1M is around 100K. This starts to make quite a large .h file to include in the sieve generator. Not that it's such a concern but scalability, you know.... And embedding such...
This is an overview of the layout in which KGE works. Get User String (Round 0)Split String Into PairsIf Not Enough Then Add Specially Made Character Which Is Deleted During DecryptionUse Byte SubstitutionSwitch User Strings To IDs and Find Replacement...
With the wiring complete I wrote a small program in Python to test the lights, buttons, and switches on the front panel. To be clear this is NOT the KENBAK-2/5 emulator running a program (yet). As it turns out I did have to replace one of the LEDs...
July was a tough month, and August is no different. Due to some components arriving late, I've only been able to start my work on the Hackaday.io project with considerable delay. So I had to catch up with everything and squeeze the entire development...
Back to the workshop for the revenge of the return of the son of the Vintage Ring Oscillator ! This time with a new ally : the ceramic capacitor ! TL;DR : it's 60% faster ! But the V/F curve might look different from @Tim 's experiments... As usual,...