Close

31094 Results for "↘ 최저가 Ò1Ò〈⑻⑷89〉83Ò⑥ ↗강남퍼블릭㎼강남퍼블릭paying퍼블릭사이즈셔츠룸퍼블릭강남퍼블릭tomb 셔츠룸퍼블릭 か♡퍼블릭술집periodic"

  • The (few) shortcomings of CueTools

  • CueTools.ConsoleRipper isn't perfect - It does a database lookup and, if included in the Online database, tries to write a WAV and CUE file with illegal file characters, eg. Question marks, colons, slashes. It even found a funny character with three...
  • Boostrapping Lights and Sensors

  • So, part of this project will involve creating very fast light pulses (the photo-flashes), and part will be detecting fast optical pulses (the milk drop and bullet detecting photo-gates). The two, of course, are related in that a fast optical pulse generator...
  • Step 3 - IMU and BLE functions

  • IMU functions The Arduino 101 Inertial Measurement Unit is fully documented and works well. For the fall detection, the software detects a short period of freefall followed by a shock. Both events are handled via callbacks: void imuInit(void) {...
  • Joules to photons. Finally.

  • Ok, sorry about the clickbait title; who can resist the promise of LEDs? I promise a photo of a lit LED in this log, so you don't go home empty handed.  This log is a quick one to introduce an intriguing potential alternative to coin cells. I have...
  • Please, GCC !

  • I get tired of fighting GCC's weird code generator that won't get a clue from my source code. I'm (still) using gcc6.4.1 (2017, I know) but I don't know how to make it understand basic things... This is critical at my level because any little performance...
  • Conquering Clocks and Gremlins

  • PSRAM Challenges The PSRAM presented numerous challenges throughout development. One issue arose from the SSI clock divider, which could only be set to even integers. When the RP2040s were originally clocked at 266MHz to meet N64 SRAM timings and the...
  • FarmBot Genesis V3

  • FarmBot Genesis V3 exhibits the following changes from Genesis V2: Updated bracket design to minimize the number screws needed, making assembly easier and faster and decreasing the number of partsSimplified cross-slide design combining 3 plates into...
  • Papers, Please.

  • I'm in the middle of a literature review in an effort to do two things. One, I'm looking to see what has been done before, and two, I'm attempting to sort out the math involved with designing machine tools well. Below I've the bibliographic entries for...
  • Counter implementation

  • I know lots of hackaday readers are HDL specialist and this content may not be useful, but beginner (including me) needs some struggle just for simple application. Here I would introduce "how to make simple counter" using my training board.The training...
  • The actual informations

  • Detecting and identifying a card As stated in an earlier log, the card insertion is detected by grounding the pin *CD. But this is not enough to make the scope believe he have a know card inside him. You need to indicate him what type of card was inserted....
  • Choosing the UV LEDs

  • LEDs come in all manners of sizes, colors and brightness. To be able to choose the most appropriate ones, we need to know what are they going to be used for. For this purpose, we did some market research on UV curing glues. After checking the datasheets...