Close

968 Results for "3D printing"

  • 3d Printing Notes

  • 1.5mm = .060 in  min wall thickness.6mm = .024 in  absolute min wall thickness.3mm = .012 in  gap for loose fit.15mm = .006 in  gap for tight fitWhen 3D printing parts that will fit together, a clearance of about 0.3 mm for a loose...
  • 3D Print Raaco Handybox Inserts (A9-1)

  • At first, I bough extra compartment inserts. But realized shortly after getting my first 3D printer, that designing and printing my own was going to be cheaper and quicker.  The dimensions of the smallest box are specified as 39mm wide x 55mm deep...
  • 3D Printing the Mechanical Coupling

  • The plan for the mill is to temporarily convert the X and the Y axis to CNC control using 3D printed parts. Then I should be able to use the 2 axis cnc to machine the final axes conversions. I have got temporary access to a Makerbot 2X which does a great...
  • 3D printing and GrabCAD

  • I was able to 3D print the nut retainers today and they came out great, still need to order the Shapeways parts to really put the entire assembly together. I'll be kicking that order off this Friday and will have enough components to get the Z-axis together...
  • 3D printed brackets

  • I designed some supporting brackets to sandwich the LCD Module to the PCB. Standard 0.1" female header pins were used on the PCB side, with the male header pins on the LCD side. This brings the PCB separation to 11.0 mm. With 1.6 mm PCB thickness on...
  • 3D-Printed Parts

  • My first assignment was to print the 3D needed parts. I used my Prusa MK3s and Red and Black PLA.  I printed 'ALMOST' all the parts from the .stl files posted by Roger. However, I used some variations: Mirrored Parts: I printed the 4 corner...
  • Making 3D Printed Enclosure

  • Designing the Enclosure :This was the most time consuming step for me.I have spent around 4 hours to design the enclosure. I used Autodesk Fusion 360 to design it. The enclosure have two parts : Main Body and Front Cover The main body is basically designed...
  • 3d Printing, Rapid Prototyping and Farm Robotics

  • This log will be a repository and notes for 3Dprinted parts that I have designed for use in the prototyping and even early small run production for the UFARM Robotics Project.Grow Light Hanging ClipThe grow light hanging clip was necessary to provide...
  • 3. 3D printing

  • There are jackets with solar panels on them currently in the market. But they all have the solar panels flat on the back. Does it actually collect enough sunlight when they are vertical? I wanted my solar panel to face the sun. Since this would make...
  • New 3D-models

  • As I discussed in the previous log I've decided to modify the build to fit the speaker below the PCB, instead of gluing it to the lid of the Altoids tin.  The first thing to do was to determine how much vertical clearance inside the tin I had...
  • Aussie Sawppy - Coupla 3D printing tips

  • Sharing to perhaps save someone else some frustration...Firstly, our Cocoon Create Touch (Wanhao Duplicator i3 Plus) has manual bed levelling, which is fine. A minor hassle, but no big deal.We've found that using the preheating function on the machine...
  • Talking with the 3D printer

  • This is the last improvement to the device : showing the state of my 3D printer.I already connected a Raspberry Pi, a TFT and a relay to the printer, installed Octoprint and writed a custom pygame interface (I love pygame + RPi). It allows me to control...