I should apply a gamma curve to the analog axes read from Classic controller to make the response of the stick more subtle near the center and more steep close to the edges. Classic controller analog sticks provide position information with...
When you search google for FAT file format you get tons of pages on formatting disks. It's harder to pull out the detailed format of the SD card. Wikipedia to the rescue (Design of the FAT file system). A less technical FAT32 Wikipedia page is File...
lBefore I can get my hands on more numbers from the scan, let's go back to 147. C-ving. For the prime 1511 and higher, there is not enough data to get a complete histogram and there are histograms with 3 holes. We already know that the holes are symmetric...
I just had to follow the leads and trust my intuition. I had noticed that the last digits of the gPEAC moduli had a strange behaviour but I only dared to dig the matter these last days and oh boy was it worth it. I had already noticed that maximal...
The STM32 board was just a hair bigger than the PIC, but the biggest pieces are still the power switch, channel button, & battery. The plan is just to print an L enclosure which scotch tapes around the hot shoe & sticks up. The antenna will...
This represents a complete OPCODE list with 14 Constants (int values) available and 10 Labels (byte values) available for creating subroutines. Constants were favored over Labels, but this is up for evaluation. NOP and HCF were both added to the official...
I might be missing a few connections yet which I'll correct as I come across them, but here is the pinout of the XC3S250E FPGA on the control board. Note that the SRAM and the Flash share an interface bus. Also note that the JTAG interface...
Ok, now it is kind of proven that binary CPLD (or FPGA) may implement ternary logic, but how we can integrate it with "true" ternary components, especially when CPLD is 3.3V and TRIMUXes are -5V and +5V? Answer is DG403 chips may do the job: Because...
In the first log I investigated the methods of growing bacteria, and extracting ,then purifying their PHA granules into usable plastics! A major roadblock is the usage of toxic solvents in the extraction and/or purification process. This means...
Place View Count Followers Comments Skulls Project Author 1 32400 415 56 148 Bench Power Supply The Big One 2 19900 370 38 142 3D Printable Robot Arm Andreas Hoelldorfer 3 48300 273 112 120 Luka EV MW Motors 4 4600 101 20 114 Eye Controlled Wheelchair!...
I'm in the middle of a literature review in an effort to do two things. One, I'm looking to see what has been done before, and two, I'm attempting to sort out the math involved with designing machine tools well. Below I've the bibliographic entries for...