2676 Results for "《 예약문의 OIO↗8489↗8306》가라오케┦가라오케world선릉가라오케가라오케사이즈청담가라오케promotion 선릉가라오케┫ ∫선릉가라오케decided"

35 lbs short
Log from Goliath - A Gas Powered Quadcopter
Thrust measurement and weight reduction has been the focus of the work on Goliath over the last few weeks. Prior to the last test, Goliath weighed 238 lbs, about 40 lbs more than the target weight when the project started. With the vehicle design still...

Latest Tests Completed
Log from Goliath - A Gas Powered Quadcopter
The latest testing with the new rotors has been completed. However, Goliath still isn't flying. Most of the testing was troubleshooting Goliath after reassembly. It seems that a few tests are always required to get everything setup up correctly when...

Prologue: The car and the need
Log from C.A.R.M.I.N.
Back in Oct. 2013, I joined a racing team for 24 Hours of LeMons and other junker leagues. The team had an ‘86 Honda Prelude 1.8L with an engine that blew 3 laps into practice at their first race. I decided that the first project I should take on would...

Slow Progress
Log from HIGH PERFORMANCE ROBOTIC ARM
So I've been as sick as a dog and wrapped up in bed at home. This might have been a great opportunity to get a whole lot of work done on the project but if I had been well enough to do that I would have been well enough to go to work since I work as...

Planning
Log from Daleklone
I just did a little reformatting on the text and added a component list. This is not actually a "components used" list but rather the stuff i think i need or already have.What's next?There's some nice blueprints on the net from a "Radio Times Special"...

Some notes on speed
Log from Cinemagraph Display
I want to be able to support 30 frames per second animated GIF's at 24-bit RGB. The LCD I chose for version 0.2 is max 320x240 pixels. 320 * 240 * 24 = 1843200 bits per frame. The LCD controller supports paging, so I can load one animation...

Hackerspace comeback
Log from Hackgyver *DEFINITELY CLOSED*
Meetings are back as well as events, after one week of reopening we participated to the second edition of OBC Auxerre (Open Bidouille Camp) the 24 Sept.An opportunity for us to celebrate again the Hacking/DIY with our friends from others fablabs/hackerspaces.We...

Working Mesh
Log from Hardware-orientated mesh networks
After the mishaps of a few weeks ago, of trying to compile a full Linux install from scratch for ARM, at the suggestion of a reader here on Hackaday Projects (mschafer), OpenWRT was adopted instead. This may change later, but for now this is the OS we...

July 24, 2015
Log from AquaPic - Aquarium Controller
Here is just a quick video update of the current status of the project and to show what I've been working on for the past while.

November 24, 2017
Log from AquaPic - Aquarium Controller
I've been continuing the trend of cleaning up the project by moving all the board designs and firmware into a single repository. The first reason for this is that the board designs are now revision controlled with git instead of copying directories....

Log #14 Hostile Environments
Log from Remote Water Consumption Display
So, I've been working on my receiver code off and on as time permits. During this time my prototype sensor/transmitter was out at the water meter. I had placed it in zip-lock bag and tightly closed it with a rubber band. That was in another bag, and...

Almost Finished
Log from Light Painting
Sadly no photos yet, but i've got everything wired up, and enough coding done to make it fully operational (although i could do with adding a mode to vertically flip the image...). Interesting side note: I'm currently testing it with a 24...

Interpreting the data
Log from Rocket Receiver Teardown
Having solved the RF part of the puzzle, we now have 8-byte data packets. As noted, byte 0 seems to be a constant 0x28 and byte 7 is a 1Wire CRC.Bytes 1-3 are a unit ID, which changes each time you rebind the device.Byte 4 is flags — bit 2 (0x04) seems...

Test video + project update
Log from DIY USB MIDI controller MPC style
Hello there,In this log I'd like to share with you a few more photos of the construction process of the first revision of this MIDI controller as well as a video which shows the very basic functionality of it. In the video you can see me mashing on a...

Designing
Log from Trash light
I have had the designs in my head for this for a while, but aside from basic sketches, I haven't drawn it all out. Also while doing this on graph paper with a pen, I realized I need to get some CAD skills for schematics.The board in the middle houses...

|<
<
3
4
5
6
7
>
>|