5837 Results for "《〈 문의 OIO↗5793↗7458 》〉강남초원의집㉩⅓everythingァ강남유흥강남룸㏁evidently 강남초원의집강남더킹 강남더킹‡강남룸Ⅹfaintly㈆"

[X] Setting up Taipo-enabled firmware
Log from AirBerries and SpaceExplorer
[16 Sep] I was thinking that I was going to set this up and then make a log about it, but it's taking a bit of time so I thought a live-running log format would be better. So far, I've tried to implement Taipo.c from a QMK source instead of a QMK->Vial...

slide control
Log from Smart Home controllers
a picturewhat i have done here. This are slider controls. i can call them on the fly and put them any where i need them. a bit of code void slidervert(int x, int y){ tft.fillRect(x,y,30,200, BLUE); tft.drawRect(x,y,30,200, WHITE); tft.fillRect(x+13,y+5,5,190,...

DISASSEMBLE JOHNNY FIVE
Log from 3D printer brain retrofit
Sexy upskirt photos of disassemblyOuter housing offBlurry shot of the inside w/ 3 pcbs removedlaid out on the table, next to the smoothieboard (on the right)everything outFront panel, begging to be replacedBack end of the extruder and thermocouplesSmoothieboard...

Getting started
Log from Flight Simulator Radio Panel
Ah, the smell of a new project. Everything fits together perfectly on paper, and no real-world obstacles have been hit yet.As far as communication with Flight Simulator X, it has an API for 3rd-party integration (SimConnect), but I haven't been able...

I am back
Log from Printing bones on a DIY powder bed 3d printer
On monday I have received the results of the exams I had in past two months. This also concluded my high school days and started my almost 3 months long break. This means I will have a lot of free time to work on this project. Even though I had final...

After playing around with the board for awhile, a few other changes that I would make
Log from 1284P-Target
Overall, I think I didn't do a half-bad job on the board but there are a few more things that I would change in addition to a reader's suggestion of dedicated headers for I2C and SPI:Move the crystal and its capacitors a little further...

Getting MUCH smaller with more features
Log from Thunder Pack
The new prototypes have arrived!The board now features a 16Mb SPI flash chip and DotStart Micro RGB LED (APA102-2020). These additions were inspired by CircuitPython. The flash chip gives much more space for your python programs and the LED is used...

All-in-one prototype
Log from Project Healing Heart
So much has happened since the last log!In this log, I'm documenting the steps I took to assemble everything into one piece with the heart prototype. As you can see in the video below, all 4 LEDs are currently working and the Arduino is still able to...

Testing Rev 3.0 Prototype
Log from All-In-One Gamma-Ray Spectrometer
Some parts came earlier than expected. Enjoy this sneak peak of a revision 3 PCB that I'm currently testing. Same board footprint, but much better layout and silk screen due to 0603 components. Also, there are less (confusing) jumpers and a breakout...

Dismissing the "new arch", the EVB, and Bitter fighting with Linux drivers (2022-10-09)
Log from Linkia
Original date: 2022-10-09 Related tweets: [1] [2] [3] [4] [5] [6] [7] [8] Dismissing the "new arch" Since the suspend-to-RAM works perfectly on the latest X1000 SoM, there are no strong reasons to keep a separate "EC" MCU anymore. But unfortunately I...

Where bits go to die
Log from Interactive Color LED grid with IR touch sensing
(March 2016)When the Grid was running on the Arduino, the very first pixel of the last board in the chain seemed to always want to trigger differently than the rest. Otherwise, it seemed to work just fine (low bitrate not withstanding).When I upgraded...

X-PC 2, Second Prototype.
Log from The X-PC. Hackaday Prize 2022 Entry
I've been given about 30 HP550 laptops. These are old and battered and perfect for turning into new X-PCs! I also wanted to test my FreeCAD model with another laptop, to make sure everything works as it should. I stripped down one the laptops, removed...

to shrink, or not to shrink, that is the aggravation
Log from Minamil 3dp: another minimal CNC mill
This is just a rant so I can stop thinking about it. So I made another frame last year. The one on the left: I made it a little big considering uncertainty about how big it needed to be. Earlier this year, it looked like some of the packaging ideas were...

On Modularity, Part 2
Log from Open Autonomous Domestic Robots
While I've been working primarily on the vacuum component of OpenADR, my eventual goal is for this to be just one of several, interchangeable modules that the robot can operate with. By making the whole thing modular, I can experiment with a range of...

Building the Y-axis
Log from Turning a Makibox into a PCB Mill
I've now built the aluminium frame and completed the Y-axis. Of course, this was not without it's problems.Firstly, I misordered - I was one set of uprights short. This may not be a massive problem though, as I hadn't taken into account the...

|<
<
2
3
4
5
6
>
>|