81368 Results for "↘ 최저가 Ò1Ò〈⑻⑷89〉83Ò⑥ ↗ 강남쓰리아워Ｆグpossibility쓰리아워┃쓰리아워가격쓰리아워레깅스룸Ｉシ쓰리아워레깅스룸unnatural 쓰리아워ы쓰리아워레깅스룸㏅㈇temper"

Iron man suit overview
Log from Iron man armor (Hackaday prize edition)
With energy, there are multiple things to look at when choosing materials. The main thing to look at for today is PSI and heat resistance. The material I choose will need a high level of both. This is due to the way the reactor works. After searching...

Frequencies
Log from Voyage 200 Upgrades
For some reason the 47 pF value for the caps is sitting in my mind. Either after 'calibration' the LC meter is so far off that it read both my TI-89's and my V200's caps 51 pf, both ~8% high, or both of them are within their 10% tolerance and reading...

Gathering information
Log from WD2002SJ Bench Power Supply
Tonight I gathered some reference/research material for this project. Fortunately, several others have done some really great work with this module, so here's credit to them: LTC3780 DatasheetBeyond Logic blog postTemplaro blog postGreat Scott videoJulien...

Next generation Kubelik - Abbado
Log from Audiophile-sounding DAC for almost no money
Here's the evolution of Kubelik based on my investigations into why Kubelik lost out in dynamics in comparison with Deca DAC.The filter now uses two inductors per channel, beyond the filter there's now passive I/V with a unity gain buffer following....

Filling cartridges Epson 702xl
Log from Invisible QR Code Navigation for Robots 2020
I filled cartridges will all the inks I have. I am likely to use noodlers and the UV absorbing ink , but I will start testing different labels soon. I picked up a Epson Workforce printer that uses these cartridges for 89 dollars from Office Depot. I...

Parity with Fibonacci
Log from PEAC Pisano with End-Around Carry algorithm
One thing that sets PEAC apart from the Fibonacci and Pisano series is the parity, or mod 2 remainder. When you take the natural sequence 0, 1, 1, 2, 3, 5, 8, 13, 21, 34, 55, 89, 144, 233, 377, 610, 987, 1597... The mod 2 is 0, 1, 1, 0, 1, 1, 0, 1, 1,...

MiCS-VZ-89T a low power air quality sensor
Log from Portable environmental monitor
Putting everything together also requires checking everything separately first. So I did with the MiCS-VZ-89T sensor, and here is the story, also presented on my blog: MiCS-VZ-89 Air Quality SensorA low power sensor that can measure at the same time...

Z80 (CP/M) Writing to SD Card
Log from 3-Chip Z80 Design
Digging into SD card writes means shifting gears from the Boot BIOS source code since the Boot BIOS code only does reads. The CP/M BIOS code (CBIOS128.LST) which does the reads/writes after booting. Here's the BIOS code for writes to the SD Card: 0754...

Breaking AES using a $90 Development Board + OpenADC
Log from ChipWhisperer®: Security Research
Long ago when I started prototyping ideas, I was using a $89 FPGA Board (Avnet LX9 board). The ChipWhisperer system has always supported this board, but it's not as well documented as my newer, fancier hardware. I wanted to make a log post to demonstrate...

We get signal
Log from Reverse-Engineering a low-cost USB CO₂ monitor
Indeed, immediately after running the Windows software in a VM with the device connected I was getting a live data log of the CO₂ concentration! This screenshot shows me breathing into the vicinity of the sensor:Ok, time to disconnect the device from...

Researching Options - Power
Log from Boxies - Low power RF LED Cubes
I'd like to avoid frequently replacing batteries or running power wires to the boxes if at all possible, as such, I'm either wanting to have ultra-low power components and 'smarter' operational times (eg only show LED's when someones in the room) or...

Finally, some publicity!
Log from RasDash
An article recently published on MOONGIFT, a Japanese developer site, has showcased RasDash! The article is entirely in Japanese and Google Translate won't accept the URL as it has special characters but YANDEX does. Below are some links and a basic...

No officer, it's not a bong. I swear.
Log from Mk 16 Capital Ship MDM
Morning update: April 13, 89 PDAfter a long night of fighting with 123D make and my 3d printer, we have our first put together. To see very bad pictures of the Main Power/Data Bus (MPDB) look at step 2 of the instructions. After getting put together,...

It's like being in college again.
Log from Mk 16 Capital Ship MDM
Mid-day update: April 20, 89 PDWhile over 75% of the internal parts are finished printing, but there is still too much to do. We have started wiring up the reactor with LEDs but it is slow going (25% done). We have not even started on the code to drive...

MORE RADII!!
Log from Hubsan X4 Replacement Frame
I haven't putzed about with the v0.1 base at all, but I think I've got a motor mount design that I like. It's got the split bolt setup for securing the motor (including a cutout for holding a 2-56 nut), and the legs are cool lofted dealies. Lots of radii...

|<
<
1
2
3
4
5
>
>|