6363 Results for "《〈 문의 OIO↗5793↗7458 》〉 초콜릿셔츠룸С 초콜릿셔츠룸drink선릉초콜릿강남셔츠룸초콜릿선릉초콜릿temporary 초콜릿가라오케╉㎧강남초콜릿sport"

Event Driven Set Points? Yes Please!
Log from Beaglebone Black Fermentation Controller
While I haven't been updating the Project page a lot, I have spent a bit of time in the last few weeks getting the last 10% of the project running. Originally I'd planned on having the GUI control the fermentation temperatures, but I realized that would...

HydraBus news
Log from HydraBus v1 Rev1.5
HydraBus Boards shall be available soon in online shop of Seeed Studio in about 2 weeks (registered users will be contacted first).HydraBus Hardware: Schematic in PDF and CADSOFT Eagle 6.x design (CC BY NC) will be available (HydraBus github) at same...

HydraBus board, Shield Template, BOM and doc available on github
Log from HydraBus v1 Rev1.5
HydraBus GitHub Repository: HydraBus_1_0_Rev1_1: HydraBus Schematic and Board CadSoft Eagle 6.x HydraBus_1_0_Shield_Template_Rev0: HydraBus 1_0 Shield Template CadSoft Eagle 6.x (licence CC BY-SA 4.0) HydraBus_1_0_PinAssignment.odg & HydraBus_1_0_pins.ods/.pdf...

HydraBus v1.0 Shield / Breakout board for ESP-WROOM-32 (ESP32)
Log from HydraBus v1 Rev1.5
HydraBus v1.0 Shield / Breakout board for ESP-WROOM-32 Rev1.1This shield can be used with or without HydraBus board, you can even cut HydraBus specific right side (on the line) to have a tiny ESP-WROOM-32 breakout board.This shield can be used on top...

HydraBus v1.0 Shield / Breakout board for ESP3212 (ESP32)
Log from HydraBus v1 Rev1.5
HydraESP32 HydraBus v1.0 Shield / Breakout board for ESP3212.This shield can be used with or without HydraBus board, you can even cut HydraBus specific right side (on the line) to have a tiny ESP3212 breakout board.This shield shall be connected on bottom...

HydraBus HydraFW v0.8 Beta Released
Log from HydraBus v1 Rev1.5
13.10.2016 - HydraFW v0.8 BetaGeneric:Updated ChibiOS from actual 3.0 to latest ChibiOS v16.1.6+/ChibiOS RT v4.0.0(Sep 27, 2016 ) Added benchmark tests see hydrafw command debug test-rx and python script https://github.com/bvernoux/hydrafw/blob/master/scripts/tx_bench.pyUpdated...

HydraBus HydraFW v0.9 Beta Released
Log from HydraBus v1 Rev1.5
30.09.2018 – HydraFW v0.9 Beta Generic: Added trigger mode on all supported modes. See commit a982d6bAdded SUMP mode autodetection. Tools like Sigrok and OLS don’t need any prior hydrabus setup. See commit ca90ec2Added \xx escape sequence in freeform...

HydraBus v1.0 Rev1.4
Log from HydraBus v1 Rev1.5
HydraBus v1.0 Rev1.4 Schematic/Board Layout are available on github, everything is done with the amazing KiCad PCB HydraBus: Hardware license CC BY-NC 4.0 (for commercial license contact info@hydrabus.com) For more details on the hardware see also http://hydrabus.com/hydrabus-1-0-specifications...

HydraFW v0.10 released
Log from HydraBus v1 Rev1.5
07.09.2020 - HydraFW v0.10 This version is the first stable version (if you find any issue please create an issue). Big thanks to Baldanos to be the lead developer on HydraFW since 2015 including all major contributions of the project (191 commits, 545776...

HydraBus v1 Rev1.5
Log from HydraBus v1 Rev1.5
HydraBus v1.0 Rev1.5 Schematic/Board Layout are available on github, everything is done with KiCad PCB v6.0.11 HydraBus: Hardware license CC BY-NC 4.0 (for commercial license contact info@hydrabus.com) For more details on the hardware see also http://hydrabus.com/hydrabus-1-0-specifications...

v0.4 Completed bar the glamour shots!
Log from MeArm - Your Robot
Actually found the time today to finish the list of updates to v0.4.Added holes for cable managementCradle redesigned using less fixings and reducing the number of incorrect configurations to one (left handed versionLonger elbow leverShortened "pig"...

More fun...
Log from Vacuum System for Deposition
I have not updated this in a while. Some of the things I have been working on:Calibrate the Film Thickness Monitor. To calibrate the crystal thickness monitor you coat a sample and compare the what the thickness monitor says you coated with what you...

E-beam power supply
Log from Vacuum System for Deposition
The biggest issue to getting this thing working has been the Electron Beam Gun power supply. This gun wants 10kv at up to 1.2amps to run it, thats 12KW! Not easy to do. I looked at trying to modify other stuff like ion pump power supplies, built voltage...

Back to the drawing board...
Log from Vacuum System for Deposition
So, I have scrapped the idea of getting this supply running for the e-beam gun. Finding a tube has been very difficult so I picked up a Thermionics EBPS15, 15kw, tetrode electron beam power supply to do the job, it is good for up to 10kv at 1.5 amps....

Full CAD model released
Log from Hoverlay II
Both Hoverlay I and II were completely layouted in Adobe Illustrator, a surprisingly flat 2D drawing tool I just happen to work with a lot. This is how it looks like, basically:Making all the parts fit without using 3D CAD required...

|<
<
1
2
3
4
5
>
>|