Close

9983 Results for "《 예약문의 OIO≡⑧④89≡83O⑥》선릉레깅스룸㉹ベgrace레깅스룸Ｓ선릉레깅스룸선릉레깅스е я레깅스룸비용superstition 강남레깅스룸′강남레깅스§８fetch"

  • The New Model
  • Log     from Open Indirect Ophthalmoscope
  • The design models have been 3D printed and assembled. We made two devices, only the outer casings are different in the two models. One is printed on a SLS 3d printer (Nylon PA-12) and another one with an FDM 3D printer (PLA Black).Both the models are...

  • April 12, 89 PD
  • Log     from Mk 16 Capital Ship MDM
  • CAD work and fabricator begins today. It is our hope to start piecing together the first parts this afternoon. It is going to be a long push up hill from here, but we do not have a scope change, yet. As soon as we have the first parts done we will start...

  • Frequencies
  • Log     from Voyage 200 Upgrades
  • For some reason the 47 pF value for the caps is sitting in my mind. Either after 'calibration' the LC meter is so far off that it read both my TI-89's and my V200's caps 51 pf, both ~8% high, or both of them are within their 10% tolerance and reading...

  • We get signal
  • Log     from Reverse-Engineering a low-cost USB CO₂ monitor
  • Indeed, immediately after running the Windows software in a VM with the device connected I was getting a live data log of the CO₂ concentration! This screenshot shows me breathing into the vicinity of the sensor:Ok, time to disconnect the device from...

  • Fibonacci
  • Log     from Gigatron TTL microcomputer
  • With the ALU verified and the RAM connected, today the breadboard determined that the first 8-bit Fibonacci number is 144. 0000 0000 ld $00 ; outer loop 0001 c200 st [$00] ; a=0 0002 0001 ld $01 ; b=1 0003 fc0a bra $0a 0004 0200 nop ; (pipelining) 0005...

  • Log #89 - CondomBoard specifications
  • Log     from Internet of Condoms
  • Size: about 50x50mm (size of condoms I have, could be a little larger if required)Layers: preferrably a single 2-layer PCB, for easier ordering at the usual suspects in ChinaConnections: debug UARTMicroUSB for charging the batterytemperature sensor connectortwo...

  • Removing undesired reflections/spots
  • Log     from Open Indirect Ophthalmoscope
  • Hey all!This is another project log to update the latest developments of OWL (Just in case you forgot, we call it OWL because, well, Open Indirect Ophthalmoscope, OIO).So, since the last time I made a log, we’ve been working on--making an elegant GUI...

  • Housing selection
  • Log     from tv-remote-elderly
  • Requirements Easily found when misplacedBig enough to hold easily but not too big that it's cumbersomeShould have a battery compartment so that unskilled personnel can replace batteries without having to open up the housingRoom enough for the necessary...

  • MIKBUG Commands
  • Log     from MIKBUG on Multicomp
  • MIKBUG (Smithbug) has the following case-sensitive commands. ; V VIEW MEMORY; E CHANGE MEMORY; M MOVE MEMORY; I FILL MEMORY; F FIND  ; D DISASSEMBLE CODE; & S1 LOAD PROGRAMME; G GO TO PROGRAM; J JUMP TO TARGET PROGRAM ; T TRACE PROGRAM; K CONTINUE...

  • FlexSEA-Plan
  • Log     from FlexSEA: Wearable robotics toolkit
  • FlexSEA-Plan is an embedded computer used for high-level computing. It boasts a powerful processor and can run an operating system such as Linux. Developing code on this platform is similar to the regular (i.e. non-embedded) software development process....

  • Diving in with Calamity and Confusion
  • Log     from Voyage 200 Upgrades
  • On my TI-89, one of the battery contacts on the PCB was heavily corroded and it took a good deal of time and heat to reflow solder to make a new pad. I did this to the V200 as a preventative measure too, but I guess I heated up the nearby fuse to where...

  • The 2019 PiDP-8
  • Log     from PiDP-8/I
  • It's already out since July, but just to log the improvements:There's actually a lot to learn about kit-making: how to prevent beginners from messing up soldering a computer kit for the first time. So it was time for a revamp of the PiDP-8, putting in...

  • Tapo circuit COMPLETED! + Tested + Programmed
  • Log     from AutoWats - A Plant in Every Home!
  • //----------------------------------------------------------------------------------------------------- // LIBRARIES //----------------------------------------------------------------------------------------------------- #include #include #include //-----------------------------------------------------------------------------------------------------...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday