Close

19867 Results for "《〈 문의 OIO↗5793↗7458 》〉 셔츠룸후기ð νeveningм셔츠룸후기선릉셔츠룸Ξthreshold 강남셔츠룸셔츠룸추천 셔츠룸후기シ셔츠룸후기㎩regular≡"

  • Regular 8 software now available
  • Log     from 8mm Film Scanner
  • I added a version for regular 8. Don't forget to use the correct sprocket!Also - for R8 and S8 you need to adjust the crop settings (line 20 onwards). This is necessary, because your camera / lens setup will most likely be different to mine.

  • Software cleanup
  • Log     from 8mm Film Scanner
  • Today I finally uploaded a cleaned up version of the software to scan Super 8 film. Please check out the (new) github project page.https://github.com/mrantonSG/FilmscannerWith this clean up I hopefully soon can also release a Regular 8 version.

  • More Battery
  • Log     from PewPew LCD
  • We have talked a little bit about the choice of batteries before in terms of the use cases, practicality and environment. But what if you need to this device to last longer than the two or three days you would normally get, and don't want to have to...

  • Design Considerations
  • Log     from Open Indirect Ophthalmoscope
  • Earlier version of the device was reconsidered in terms of following aspects:• Accommodating for different refractive errors • Aesthetics • Ergonomics • Weight distribution OIO ASSEMBLY EXPLODED ASSEMBLY1. ACCOMMODATING FOR DIFFERENT REFRACTIVE ERRORS...

  • Mix It Up
  • Log     from Responsive Paintings
  • The tldr; on this is that I got some gel medium to mix the thermochromic pigment powder into and I like the way it's handling a lot better than mixing it into white paint. Now then.In the last set of tests, I had mixed the thermochromic powder...

  • New dials
  • Log     from Utterly Hipster Bicycle Speed & Cadence Gauges
  • We printed a new version of the dials on a glossy sticker paper. They should prove more durable than the ones printed on regular paper and, of course, stick to the metal plates below them so they don't wrinkle or bend. We've also printed some dials in...

  • And... Done?
  • Log     from Breadboarded 3-Axis Sine-Cosine Controller
  • Schematics and code are posted in the Files section. Had a dial indicator attached to an X axis cobbled together with regular threaded rod, with my PC moving it to and fro. The GCode had it moving +/-0.1 inches, and that is what it did. I'll check back...

  • Version 3
  • Log     from Camera Shield for S2 Mini
  • Another sleepless night, and another PCB designed. This time I put most of the components on the front, and I included all the capacitors and even the resistor between the analog ground and regular ground. I skipped the inductor, though, too much hassle.Will...

  • Power connector
  • Log     from Macbleth: macOS tablet
  • Mac Mini M1 uses 12v PSU and 10x2 2.0mm pitch connector. Layout can be found here: https://www.ifixit.com/Document/qMotFqYMafDIeWWb/MacMini2018_DC_Connector.pdfI used a regular PCB connector and thick enough wire in silicone insulationMac Mini...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday