Close

578 Results for "《〈 문의 OIO↗5793↗7458 》〉 셔츠룸후기た 《〈 문의 OIO↗5793↗7458 》〉 ⑷plenty㎋셔츠룸후기셔츠룸후기んteeth 셔츠룸후기선릉셔츠룸 강남셔츠룸￦셔츠룸ⓤsilverⓞ"

  • Purchased Hardware & Electronics
  • Log     from Delta 3D Printer
  • In order to stick to my design goal of an AUD$1000 budget I decided to start a bill of materials spreadsheet. This would be a handy tool to keep track of budget and also allow me to show people if they wanted to try making something similar. Below is...

  • Putting all thogether
  • Log     from Mini WiFi/BLE 4WD robot platform
  • When the controller and the housing are assembled the wheels can be placed. Therefore the gears with 8 teeth (6 pcs.) and 12 teeth (2 pcs.) need to get equipped with a brass axle. A 3mm brass rod can be used for this and will stick well in to the gears....

  • As the gear turns
  • Log     from MultiBot CNC v2
  • Edit, fixed some bugs with the equations. --- For my rotary project I needed to 3D print a gear that would interface with a toothed timing belt. However when I tried to wing it and make one without doing any real research the belt did not interface...

  • [M] 19mm OD roller
  • Log     from SecSavr Suspense [gd0105]
  • I wasn't expecting to be getting into PrecisionPefect (aka low clearances between parts) modelling so early in the game. The M3 mounting bolts were cutting into the space of the 605 bearing, so I've changed all rails from 9C to 9H and placed the bearing...

  • Tracks!
  • Log     from Bot Matrix
  • OK, another weekend, another subsystem. This time I've been working on a prototype for my tracks module. The robot will be tracked (tank, caterpillar whatever) - I bought some rubber tank tracks from Aliexpress (type D), and assumed I would sort...

  • Ivan the Fourth - Iterations
  • Log     from Ivan the Teambuilt Robot
  • Ivan's base is now constructed! Printed and assembled, I am both pleased and shaking my head a bit at the results. Though the parts do fit and will function just fine, there are some issues that require correction. These issues include gear spacing,...

  • CAD prototyping on modular structure.
  • Log     from Soft Robotics Modules
  • The idea is to make these fabrication blocks as modular as possible. CADing these is a good way to take good ideas and turn them into bad ideas. The method of binding the sections together with M3 threaded rod works for the linear sections that follow...

  • Status 6/18/16
  • Log     from Web Enabled Microscope
  • Started modeling the 3D printed focus motor holder in Fusion 360. The plan is to have one side of the motor on a pivot, and the other side with a tension spring pulling up on it and keeping it in contact with the focus wheel. Ideally the force would...

  • GPS Module Integration
  • Log     from Raspberry Pi SDR Cyberdeck
  • Bench tests indicated an active GPS antenna placed under the top of the Cyberdeck acquired plenty of satellites with good signal strength, hence the next step was an internal GPS module.The active patch antenna and corresponding NEO-6M receiver PCB conveniently...

  • PCB Cutter
  • Log     from Retro rack and backplane computer
  • A bit of a distraction but a necessary one. The PCBs in the main picture are from China and they were supposed to be 150mm x 100mm x 1.7mm but when they arrived they were 151mm x 100mm x 1.1mm so they are too thin to use to align the back-plane. I ordered...

  • Hacklet #4 - PCB Tools and Wristwatches
  • Log     from Hackaday.io Project
  • The Hackaday Prize is heating up! When we set up the prize, we expected to see some incredible entries, and you guys haven’t let us down. Projects like SatNOGS, which aims to create a global network of satellite ground stations, or OpenMV, a low-cost...

  • Changing platforms.
  • Log     from GimbalBot
  • TL;DR: STM32F4+ChibiOS/RT --> Arduino Due, because I need to keep moving.In my 29 years, the biggest challenge I've had with projects has been staying motivated. That's why GimbalBot is on HaD.io; chasing a silly prize is a great bonus, but I'm hoping...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday