13755 Results for "《〈 문의 OIO↗5793↗7458 》〉 셔츠룸후기ð νeveningм셔츠룸후기선릉셔츠룸Ξthreshold 강남셔츠룸셔츠룸추천 셔츠룸후기シ셔츠룸후기㎩regular≡"

OS Upgrade and introduction of WiFi enabled device
Log from Open Indirect Ophthalmoscope
This log includes major upgrades included in the current system.Till now we had been using an older OS incompatible with RPi 3 since the display could have only worked with that image. Additionally it caused the trouble where the onboard or external...

Removing undesired reflections/spots
Log from Open Indirect Ophthalmoscope
Hey all!This is another project log to update the latest developments of OWL (Just in case you forgot, we call it OWL because, well, Open Indirect Ophthalmoscope, OIO).So, since the last time I made a log, we’ve been working on--making an elegant GUI...

Design Considerations
Log from Open Indirect Ophthalmoscope
Earlier version of the device was reconsidered in terms of following aspects:• Accommodating for different refractive errors • Aesthetics • Ergonomics • Weight distribution OIO ASSEMBLY EXPLODED ASSEMBLY1. ACCOMMODATING FOR DIFFERENT REFRACTIVE ERRORS...

2019 Update
Log from 3D Printable Robot Arm
It's been 4 years since I started this project. Its had some downs and a lot of ups. Time to give you an update about whats going on.Notice: "No robots were harmed during making this video."I post regular updates on my Instagram feed if you are interested...

Improved PCB ESPboy.pro v2.1
Log from ESPboy - RetroGaming&Software development MuliTool
ESPboy.pro v2.1 improvements. The PRO version is rather complicated and i think it will be sutable only for hardcore geeks :) For regular users it's better to take EDU version! 1. 2 side buttons added for more comfortable horizontal usage 2. Micro...

Future Goals (20190808)
Log from PCB Decahedron
The next revision of this project will focus on the following points.I will use a regular polyhedron as a design point, likely a tetrahedron (4 sided die).This will simplify the side design and the jig design.Initially this project was designed to compete...

PCBs received, first board populated & tested: SUCCESS !
Log from a Break Out Board for an eXtremely Small Proc.
have received the boards (10 of them) from china this morning (2016/03/21) and I have immediately populated a board - just to see...I am not equipped with reflow oven at my office, so I have made an attempt with a regular (big 80 Watt) Weller soldering...

Challenges for this project
Log from Trinket Pedometer
This biggest challenges for the project are : 1) How do I keep the size small and at the same time keep it functional as a regular pedometer ? ( The last thing I want is a huge box hanging off my belt loop 2) How do I power/recharge the dang thing...

X-Axis
Log from OpenLRC - The low cost linear rails CNC
The x Axis is the exact same as the regular Spinx. I printed the plates in Black Amazon basics Petg with 5 perimeters and 100% infill. I used 3d printed rail aligners to temporally install the linear rails. Im using MGN12H knockoffs off alibaba....

PPE 4 Me
Log from MultiBot CNC v2
I have been using a regular old paper shop mask with my machine for a while now. But recently I started experimenting with plywood using some crufty old wood from my local big box store and the dust has been making me cough for hours afterwards. ...

LEGOs has arrived!
Log from Livestock and Pet Geofencing
We ended up ordering two items and got the Year of the Tiger box FREE! We ordered the LEGO MINDSTORMS Robot Inventor and a small LEGO 4-Stud Red Desk Drawer. Some people might be asking why we purchased the Desk Drawer, but it turns out it is a giant...

Main circuit almost complete
Log from Ultra-Portable Sustainable Electric Generator
see gallery for schematic, more pictures to come. circuit diagram does not show potentiometers: there are two, attached to voltage regulators. I finished drawing out and assembling the main circuit, except for the linear voltage regulators and toggle...

(NOT) Fake!
Log from 68040 upgrade for Powerbook 520c
Well, that's the end of that. My 68040 is most definitely a fake. Looks like they took a 68LC040, took off the markings, and printed or lasered on fake ones.--- NONONONO! ---MC68040EC33V does not contain an FPU, despite no 'LC' designation! Arrgh!!!http://www.cpu-world.com/CPUs/68040/Motorola-MC68040FE33V.htmlI've...

Over torque...
Log from Morgan Industries G-125T Injection Molding Machine
Scheduled maintenance on the compressor says that after one hour of operation, you check the belt tension and verify the cylinder head bolt torque.Not sure if it was the torque wrench (not likely), the bolt (even less likely) or the operator (highly...

Working on Version 4
Log from 3D Printable Robot Arm
I'm working on a new version based on the experience I made with the previous versions. The plan is to use stepper motors and timing belt gears. The plan is to use a Nema23 stepper for the rotary base,Joint one and two will be Nema24 ( this: http://www.omc-stepperonline.com/dual-shaft-cnc-stepper-motor-nema-24-100mm-4nm566-ozin-24hs393008d-p-388.html...

1
2
3
4
5
>
>|