1350 Results for "3D printing"

New Enclosures Available
Log from FlowIO Platform
The redesigning of the enclosures is now complete and the new STL files are available for download on the project website https://www.softrobotics.io/flowio under chapter 2. The latest enclosures have been greatly improved on their visual...

Inspiration
Log from Automated Chessboard
I came across a couple of projects on Kickstarter on chess automation, where the chess pieces essentially move itself. However, most of them are not either not available for sale or haven't been manufactured. I figured it would be a good excuse to start...

Top plate vibration isolation solution
Log from Open Sky Anchor WiFi Drone Brings The GIG
ok , so as I was previously indicating, I will use the second plate I have to make a raised platform. The temporary spacers will be swapped for custom vibration isolators normally used for camera gimbals. This also raises the sensors and gps module...

A try at additive fab
Log from A Cheap Compact Linear Slide
A first whack at re-rendering the basic idea for 3d printing......and experimenting with zip ties for assembly.No axial stagger between rods when closed, so length overall = length of one rod = 120mm in this instance. Range of motion limited short by...

MPCNC what you did there.
Log from The Metabolizer
So far I've been able to turn trash into energy, and I've been able use that energy to shred trash- including plastics. Most plastics in the waste stream are recycleable, and although you could burn them for energy, it's a waste of a precious...

Being built.....
Log from Lowest Complexity Laser Cutter
should be able to show it before today goes up- April 30thThink that was a lie. Past week has been confusing. All of the parts are now here, but some parts are ... gone. The main parts, corner and bridge, had pockets for screw head so that various lengths...

Nozzle presets
Log from Apartment ventilation system
Positioning the nozzle by IR remote has grown into a pain in the mane. It would be money to have 3 preset positions. The mane problem with presets was supporting 5 more remote control buttons. The clockspeed had to be stepped up to...

Mockup stage 1
Log from TOME - Portable 3D Printer
Today we received the first prototype part order, which contained enough of the components to start assembling the prototype to check for errors in the design. As stated before the clear PLA parts shown in the images will be replaced with 3D printed...

Mold Building
Log from Soft Robotics Modules
This isn't going as well as I was hoping, to many thing and not enough spare time. The premise of this project was to significantly improve the mold for the silicone actuator. Deconstructing the mold and individually improving part of the molds...

Log Entry 1: Progress So Far
Log from Excel-ARK Kinetics Coil Gun
in this log ill add pictures for all of the components ive printed so far. I am currently printing the inner barrel (with coil stops) at about 15.3" (388.5 mm) tall with about a 1.25" radius. Did a few test prints for the interface...

Setting Adaptive Layer Height With Cura for the Monoprice Select Mini
Log from Fixing Up the Monoprice Select Mini
Recently I started printing 3d topographies as an educational tool. They are relatively flat for the majority of the print, but when it comes to the surface, having thicker layer heights left much to be desired. Due to the large volume being printed,...

Going from Proto to Production
Log from SAB3T - PID Loop Educational Tool
I've designed SAB3T to be producible in low volumes with the tools that I have at my disposal. All of the parts that you can't go to Digikey or McMaster and buy can be fabricated by tools that I have access to. This is a proven process for me as I've...

Piezo Pumps
Log from DIY Inkjet Printer
Because the current design with hydrostatic pressure fed prindhead has some reliability problems - sometimes one of the four heads starts dripping or sucking in air before or during printing - I'm working on a possible solution right now. My plan is...

Manufacturability
Log from Badminton ACE Shuttle Launcher
In order to keep the project cost low and accessible I decided to use 3D printing for the majority of the design. 3D Printing has many benefits including low cost, high availability, and very high design flexibility. All of the printed parts are...

Check Our Our Thingiverse Page
Log from LipSync
Thingiverse is the world’s largest 3D printing community. It’s the go-to resource for discovering, making, and sharing 3D printable things. And now, Makers Making Change is a part of it too. Check out our Thingiverse page here. Our uploaded designs include...

|<
<
2
3
4
5
6
>
>|