2368 Results for "《 예약문의 OIO≡⑧④89≡83O⑥》강남레깅스⒴선릉레깅스룸allowed⑧레깅스룸선릉레깅스룸선릉레깅스badly 레깅스룸견적㎸레깅스룸견적♤ⓩ강남레깅스provisions"

RN-52 Module not going to be used
Log from RasPi Car Computer
After getting the RN-52 module hooked up to a USB/serial cable and getting the module configured and paired with my phone, I connected my logic analyzer to the digital audio output. It took me an embarrassingly long time to figure out that the silkscreen...

Drilled perfboard and enclosure
Log from explorad - input device
I cut out a piece of perfboard to fit into an enclocure that is comfortable to hold in one hand, added mounting holes, decided where the buttons should be and drilled holes for them into the enclosure:The buttons will be through-hole devices, but mounted...

Moved to enclosure, hardware seems to work
Log from explorad - input device
I finished the enclosure by adding cutouts for a switch, the USB cable, and an extra reset/program button for the Teensy.The perfboard is also finished for now, I'll only need to modify it again when I add the touch wheel. The buttons are now connected...

Coming together
Log from Portable Pi/Emulation Station
My screen came in finally, so now I have been working on an enclosure. I think I'm going to use a tackle box, laid out thusly:I have a lid to a different box that I am using to protect the screen. I was going to use it for the project box, but it would...

Enclosure
Log from Simple Universal Motor Speed Controller
Also wanted to mention something else on the to-do list. As this controller deals with live household current, it should definitely be contained in an enclosure when in use. So, in addition to what I am already working on, once I have the...

Project Update
Log from Scanning Tunnelling Microscope
Apologies for the lack of work over the last few months. I have been starting my PhD on microwave metrology and it has taken a lot of my time. However, I have now acquired an enclosure for the microwscope (an old 3U eurocard chassis from a vacuum controller)....

Prototype pictures added
Log from "Connect" to an atomic clock in space! GPS, DCF77
I have added a few pictures from my prototype. I will further advance this one, redesign the PCB improve the SW, and design a nice enclosure.

PCB design is ready
Log from "Connect" to an atomic clock in space! GPS, DCF77
I have just finished the PCB design. The PCB will fit into a Deltron 479-0160 enclosure.I will make a final review on the design than send it to manufacturing.

PCBs arrived
Log from "Connect" to an atomic clock in space! GPS, DCF77
I have just received the new blue PCBs, I will have 2 PCs manufactured in red too next week. The PCB is nicely fits into the Deltron enclosure. Beauty.

First blue PCB populated and mounted
Log from "Connect" to an atomic clock in space! GPS, DCF77
I have just finished mounting the components on the first PCB. I mounted the populated PCB on a Deltron enclosure. Uploaded some project pictures about it.

First test
Log from Portable travel NAS
The battery's charged, hard drive has lost its enclosure and gained some music, the Carambola has the right config.This is the current setup, i'm working on an enclosure:I already had tried with a usb key, not sure if a 1TB hard drive could be handled...

3D printable enclosure
Log from Portable travel NAS
Instead of smacking the components together in a sandwich box I decided to design a fancy 3D printed enclosure for my components. Stacking them up in a pyramid fashion like you see in the HTC One for example.Here's a little render:As you might be able...

Assembly
Log from Portable travel NAS
The printed enclosure was finished way before I expected, I found myself racing on my bike to the pickup location on a tropical day.It took a couple of minutes of sanding to have all the parts fit inside, but it was a glorious moment when done.Not wanting...

Components for for LPG inscriber and spectrometer
Log from DIY fiber optic sensors
After a few weeks of waiting, I managed to get all the components I need for start.For example, this nice transformer. Yep, it's 5kV.I'm going to inscribe the long period grating (LPG) into fiber using electric arc and this guy (and I have it's identical...

Hardware Revisions -- Preparing for Release
Log from Open Source Science Tricorder
After a marathon programming session, the different modules of the software came together wonderfully for the prototype video nearly two weeks ago -- it's been very exciting to see the Arducorder Mini hardware coupled with an attractive and intuitive...

|<
<
3
4
5
6
7
>
>|