Close

90479 Results for "《〈 문의 OIO↗5793↗7458 》〉 셔츠룸후기ð νeveningм셔츠룸후기선릉셔츠룸Ξthreshold 강남셔츠룸셔츠룸추천 셔츠룸후기シ셔츠룸후기㎩regular≡"

  • Laser Cutting v. 3D Printing
  • Log     from R2Pv1-OmniBot1
  • Hi, The main body plate is laser cut.  It only makes since but although I used 3mm thick acrylic plastic, the body plate could easily be cardboard.  I'm hoping to see somebody laser cutting body plates from regular 3mm thick cardboard...

  • New dials
  • Log     from Utterly Hipster Bicycle Speed & Cadence Gauges
  • We printed a new version of the dials on a glossy sticker paper. They should prove more durable than the ones printed on regular paper and, of course, stick to the metal plates below them so they don't wrinkle or bend. We've also printed some dials in...

  • Push rod top, done.
  • Log     from Arcus-3D-C1 - Cable 3D printer
  • Mocked up a simple clamp and wingnut for adjusting the compression spring on the push-rod. Uses a regular M3 nut, bolt, and washer. Printed.  Works. Added to the OpenSCAD source.EDIT: Broke it.  Changed the design to make it stronger in that...

  • LoRa Text Messaging
  • Log     from ESP32 WiPhone
  • 2 WiPhones with LoRa daughterboards can exchange text messages using the regular text message interface on the phone. It works just like sending a text message. Contacts have an optional LoRa address field that can be entered in the same place you set...

  • Got the Nerf Auto-Loader Working
  • Log     from Anti Drone Gun Turret
  • I got the auto-loader working. It's not quite as fast as I was hoping, but it'll do for now.Now I just need to integrate this with the gimbal controller. The first motion is a quick jog forward, which fires the gun using the slam fire feature, followed...

  • First layout and some ideas
  • Log     from FUNtroller 1.0 - Make Your Game Harder
  • This is the top side of the controller, which contains regular switches, buttons, and one joystick, but any button with a substandard label is connected to a special pin on the board, which will perform one or more actions:NothingShuffle button mappingActivate...

  • Future Goals (20190808)
  • Log     from PCB Decahedron
  • The next revision of this project will focus on the following points.I will use a regular polyhedron as a design point, likely a tetrahedron (4 sided die).This will simplify the side design and the jig design.Initially this project was designed to compete...

  • And... Done?
  • Log     from Breadboarded 3-Axis Sine-Cosine Controller
  • Schematics and code are posted in the Files section. Had a dial indicator attached to an X axis cobbled together with regular threaded rod, with my PC moving it to and fro. The GCode had it moving +/-0.1 inches, and that is what it did. I'll check back...

  • Interlinked
  • Log     from THE GEM - Smart LED Grow Lamp[Light&heatsource]
  • Theoretically everything should be aligned now. Thinking of breaking out the 5th fan channel on the mother-shield, so it can be useful without the connector BoB. That is, with a regular 4pin fan connector. That should cover it. I have decided to use...

  • Version 3
  • Log     from Camera Shield for S2 Mini
  • Another sleepless night, and another PCB designed. This time I put most of the components on the front, and I included all the capacitors and even the resistor between the analog ground and regular ground. I skipped the inductor, though, too much hassle.Will...

  • 20.03.2022
  • Log     from Tectonica Synth
  • Almost finished the left control panel, the photo gives an idea of how it should look like.When printing self-adhesives (in a regular photo studio), they made a big mistake in size, although I output it in PDF.The lamination doesn't work well...Apparently,...

  • 02.04.2022
  • Log     from Tectonica Synth
  • Today I assembled the system in the most complete electronic configuration and played a little on the synthesizer)))The surprise was the huge sensitivity of the power amplifier, I will think about what to do with it.I had to turn all the controls down.The...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday