Close

8219 Results for "3D printing"

  • Racing the Beam Ray Tracer
  • Log     from Pano Logic Zero Client G1
  • Originally published here: https://tomverbeure.github.io/rtl/2018/11/26/Racing-the-Beam-Ray-Tracer.html Executive Summary This project uses real-time ray tracing to render a bouncing sphere on a plane.Think of it as a technology demo, the way they...

  • Hack Chat Transcript Part 2
  • Log     from Flexible PCBs Hack Chat with OSH Park
  • oshpark12:22 PM@Aaron_Kraus The substrate itself is spot-on 4.0 mils, which I've measured with a micrometer across multiple panel runs. The copper would likely be the largest variable, but should be with our stack-up specs https://docs.oshpark.com/services/flex/....

  • Hack Chat Transcript, Part 2
  • Log     from Software Defined Radio Hack Chat
  • BSA Secure12:31 PM@RichardCollins I'm playing with Viasat Surfbeam 2 modems and their TRIA's (Outdoor units) that supports Input (RX) Frequency 18.3 to 20.2 GHz Output (TX) Frequency 28.1 to 30.0 GHz. I'm getting them on various none-ebay portals for...

  • Hack Chat Transcript, Part 1
  • Log     from Circuit Sculpture Hack Chat
  • Hi everyone, welcome to the Hack Chat. We're excited to have @Mohit Bhoite | मोहित भोईटे today to talk about his wonderful circuit sculptures. If you haven't seen them, you should check them out at https://www.bhoite.com/sculptures/...

  • Hack Chat Transcript, Part 1
  • Log     from Physical Security Hack Chat
  • Deviant Ollam12:00 PMGood evening, good morning, and good 'morrow... depending on what time zone you're in while reading this! 👍 Hello all, welcome to the Hack Chat today. I'm Dan Maloney, I'll be moderator today for our chat with Deviant Ollam....

  • Hack Chat Transcript, Part 1
  • Log     from Harnessing Your Creativity Hack Chat
  • Hi all, welcome to Hack Chat. I'm Dan, I'll be moderating today for Leo Fernekes as we talk about "Harnessing Your Creativity." I know it's late -- or early -- where you are Leo. Are you online yet? Leo Fernekes12:00 PMYes - here and live Good morning!...

  • Hack Chat Transcript, Part 1
  • Log     from 2022 Hackaday Prize Hack Chat
  • Dan MaloneyApr-13 12:00 PMHello everyone, welcome to the Hack Chat. I'm Dan, I'll be moderating today along with Dusan as we talk about the 2022 Hackaday Prize with Majenta Strongheart. Dave BlundellApr-13 12:00 PMha_proxy is another good way of doing...

  • Cyrillic alphabets in Terminal-BASIC output
  • Log     from Terminal-BASIC
  • My friend Dylan Brophy inspired me to investigate the ability to output the cyrillic text using different output devices, supported by Terminal-BASIC. 1. Using symbols others then capital latin in identifiers not possible and unnecessary. 2. USART output....

  • Testing the thermal image sensor
  • Log     from OpenHAP
  • Testing the MLX90640 firmware support stack Melexis, creator of the MLX90640 provide a firmware stack that is available directly on github. The stack was written to be run off a Teensy running mbed os. I thus ported the stack over to the ESP-IDF development...

  • Days 3,4,5: Eureka, sound and images found!
  • Log     from Tsukuyomi
  • 1. Toolchain not found After stepping away few days far from my PC for family reason, I resumed my activities on the Tsykuyomi project.So I started by reading the https://github.com/WHhkwong/SIPI_Bear_playback code and looking for a SNC7001A Toolchain/SDK...

  • Hack Chat Transcript, Part 2
  • Log     from Electromyography Hack Chat
  • Daren Schwenke12:41 PMwith ultrasound you probably wouldn't be measuring the nerve activity you'd be measuring the actual contraction of the muscle, but it might fill in the gaps.. hut12:42 PMDidn't know you could use ultrasound for that, that's fascinating...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday