3944 Results for "%E3%80%8A%EC%98%88%EC%95%BD%EB%B2%88%ED%98%B8OIOX8489X83O6%E3%80%8B3hours%EB%A0%88%EA%B9%85%EC%8A%A4%EF%BC%B13hours%EB%A0%88%EA%B9%85%EC%8A%A4%EA%B0%80%EA%B2%A9red3hours3hours%EB%A0%88%EA%B9%85%EC%8A%A43hours%EA%B0%80%EA%B2%A9normal 3hours%EB%A0%88%EA%B9%85%EC%8A%A4%E3%81%97%E2%80%A1%EA%B0%95%EB%82%A83hoursdark"

Simple Command Driven Interface
Log from Not Quite Useless Raspberry Pi Replacement
Wrote a very basic command interface with three commands:W - Write the EEPROMR - Read the EEPROMB - Bounce an LED across the RPP-UIO-16 cardThe result looks like this:Write to the EEPROM Read from the EEPROM 0000 00 01 02 03 04 05 06 07 08 09 0a 0b 0c...

Gathering information
Log from WD2002SJ Bench Power Supply
Tonight I gathered some reference/research material for this project. Fortunately, several others have done some really great work with this module, so here's credit to them: LTC3780 DatasheetBeyond Logic blog postTemplaro blog postGreat Scott videoJulien...

Command And Control
Log from Reverse-Engineering the milight on-air protocol
When entering a short test sequence on my remote this is what my receiver displays (a dot means an exact repetition of the previous packet):All on: 07 B0 F2 EA 35 90 01 B9 AC F9 .......................... 07 B0 F2 EA 35 90 00 B9 74 E0 .. Color red: 07...

First attempts at understanding how the video link works
Log from Controlling a JJRC H37 Elfie quad from a PC
I haven't done any further tests with the UDP controls, but I captured some more traffic in order to try to figure out how is the video transmitted between the quadcopter and the mobile phone. The communication seems to be established through port 8888...

Access SD Cards from the PSoC
Log from 3-Chip Z80 Design
I'm going to create a stand-alone PSoC project to use the PSoC to read SD cards. I'm going to start with the hardware defines for this project (which should leave the Z80 hardware pins unmolested) and just not download code. For the software piece, I...

ALU and Instruction Set
Log from Novasaur CP/M TTL Retrocomputer
Hardware testing is complete on all the jump and branch instructions. So that's the first 8 out of 256 instructions tested! The next 24 are loading operands. These should work fine since the jump/branch instructions are also loading operands in order...

Comm protocol between camera and drone controller
Log from Reverse Engineering a ProMark VR Toy Drone
Initially I thought the data stream from the camera board to the quadcopter controller was PPM. This signal is only active when the app is running and the on-screen controls are brought up. The quadcopter has to be power-cycled in order to be controlled...

Timing & camera settings
Log from Wireless ETTL flash conversion
Got some more packets with timing values for key bits. 8e/ff 8e/b5 de/4c 8e/e5 0d/ff 8e/a9 91/25 8e/a1 2b/f8 2b/a5 00/2c 8e/b9 00/80 8e/bd 18/00 69/23 23/99 ff/fb 02/ff 8e/f9 55/ff 8e/f7 7b/ff 8e/b3 00/12 00/46 00/2f 00/f5 57/ff 49/ff 5c/ff 0f/ff 00/be...

Paper Model now Steps. Stepping algorithm optimized. 11 bytes saved.
Log from Mystery 6502 program for the Kim Uno #1kBChallenge
I was looking for a way to make the Excel Paper Model for the Z30 calculate the stepping points so it would be a complete model of the machine. The example shown below is for a rotor with a Ring Setting of 4, the 1 mark on the ring is set to the 4 position...

Cyrillic alphabets in Terminal-BASIC output
Log from Terminal-BASIC
My friend Dylan Brophy inspired me to investigate the ability to output the cyrillic text using different output devices, supported by Terminal-BASIC. 1. Using symbols others then capital latin in identifiers not possible and unnecessary. 2. USART output....

New Boat, New Autopilot - using an old laptop mainboard!
Log from OpenCPN Chart Plotter /w Autopilot and Waypoints
For quite some time I have been thinking about the possibility to using a laptop to run all the heavy OpenPlotter and OpenCPN stuff instead of using a Raspberry Pi. The performance of the RPi is... well it's usable but it's not a pleasant user experience....

Interfacing ternary and binary components
Log from Homebrew ternary computer
Ok, now it is kind of proven that binary CPLD (or FPGA) may implement ternary logic, but how we can integrate it with "true" ternary components, especially when CPLD is 3.3V and TRIMUXes are -5V and +5V? Answer is DG403 chips may do the job: Because...

ETTL protocol with the EOS RP & 580 EX II
Log from Wireless ETTL flash conversion
The STM32 board was just a hair bigger than the PIC, but the biggest pieces are still the power switch, channel button, & battery. The plan is just to print an L enclosure which scotch tapes around the hot shoe & sticks up. The antenna will...

The actual informations
Log from Extension card for TDS3000 scopes
Detecting and identifying a card As stated in an earlier log, the card insertion is detected by grounding the pin *CD. But this is not enough to make the scope believe he have a know card inside him. You need to indicate him what type of card was inserted....

I2C on OPT8241
Log from 3D-ToF scanner
I have connected the opt8241 sensor over I2C. I have disabled sensor clock by setting MCLCK to 0. Power consumption of adapter board is ~1.8 mA. Then I have sent the i2c commands. Command output : # i2cdetect 2 WARNING! This program can confuse your...

1
2
3
4
5
>
>|