90479 Results for "《〈 문의 OIO↗5793↗7458 》〉 셔츠룸ヒ《〈 문의 OIO↗5793↗7458 》〉㎛beforehandム셔츠룸후기셔츠룸후기╇pen 선릉셔츠룸셔츠룸가격 셔츠룸‰강남셔츠룸㉦nestㅳ"

The New Model
Log from Open Indirect Ophthalmoscope
The design models have been 3D printed and assembled. We made two devices, only the outer casings are different in the two models. One is printed on a SLS 3d printer (Nylon PA-12) and another one with an FDM 3D printer (PLA Black).Both the models are...

Removing undesired reflections/spots
Log from Open Indirect Ophthalmoscope
Hey all!This is another project log to update the latest developments of OWL (Just in case you forgot, we call it OWL because, well, Open Indirect Ophthalmoscope, OIO).So, since the last time I made a log, we’ve been working on--making an elegant GUI...

OS Upgrade and introduction of WiFi enabled device
Log from Open Indirect Ophthalmoscope
This log includes major upgrades included in the current system.Till now we had been using an older OS incompatible with RPi 3 since the display could have only worked with that image. Additionally it caused the trouble where the onboard or external...

Design Considerations
Log from Open Indirect Ophthalmoscope
Earlier version of the device was reconsidered in terms of following aspects:• Accommodating for different refractive errors • Aesthetics • Ergonomics • Weight distribution OIO ASSEMBLY EXPLODED ASSEMBLY1. ACCOMMODATING FOR DIFFERENT REFRACTIVE ERRORS...

Donor Cabinet work
Log from Star Trek: The Mirror Universe Pinball
7/29/2013: As I stated; been working on the cabinet for the Mirror universe project. I bought a couple of "project" Bally Star Treks from a fellow pinball collector out of Shertz a few years ago. These have been setting in storage for a while... and...

Work in progress
Log from Laser cutted Plotter
Pen lifting mechanism.

Completed!
Log from Scratch Pen
Scratch pen is ready for use!

Selling on Tindie
Log from RT Soldering pen
Selling is now open https://www.tindie.com/products/vlk/rt-soldering-pen/

Pen Holder v1
Log from plotbot
I made a simple pen holder out of brass strips, it is a parallelogram with plastic washers as bearings. A tension spring is used to ensure the pen has always contact with the paper, and a mini-servo is used to lift and lower the pen. While working okayish,...

Holding a Pen
Log from SpiroBot
During the initial design stages of the SpiroBot, the issue came up of how the robotic "arm" was to hold the pen. Our particular design required that the pen be able to move vertically to adjust to small irregularities in the height of the platform and...

Added a small Z Axis and a Pen
Log from Homemade PCB-Mill / Laseretcher
I've added a small Z-axis out of an old DVD-Drive and hoocked it uf to my CNC. At the z-axis i mounted a pen, so now my machine can plot pictures on a Paper or flat surfaces like my "Sprit" or alcohol bottle.

First Print
Log from 3D Printable Stroke Victim Writing Utensils
Some stroke patients can hold onto a ball, but not a regular sized pen. So the solution is to put a ball onto a pen. The large surface area of the ball allows for weak fingers to hold onto the pen. I used tinkercad to create a 50mm sphere with a 9mm...

prototype 0.5 and 1
Log from Sequino
the first two prototype was just figuring out the frame and kinematics . I didnt want the the pen to have any kind of ugly wires hanging outside which would be the case had i used a normal solenoid or a servo to lift the pen. To avoid that i used a h-bot...

Feeder
Log from brdMaker
Gear now uses 1.2mm x 20mm nails. Just flat head is cut off with side cutters. With correct size of hole, pins are easy to push in into correct depth. Little screw locking is applied into hole beforehand. Ordered some HAL sensors from TI. When arrives,...

1
2
3
4
5
>
>|