By using a four-bar linkage to replace a knee joint it may be possible to eliminate spinning disks at the knee joints! The number of breaks would stay the same. The two from the knees would just move up to the previous (hip) joint. This will...
I have 2 robots now and an HP system to keep track of robot health. When a robot gets hit their health bar lowers. We had our first match and it was lots of fun. https://www.twitch.tv/videos/290434546
The robot as tested so far is fairly strong and quite reliable. The 3D printed valves are fully functional but the muscles and arm joints could be improved upon.The video shows the robot in a pre-programmed sequence--picking up a water tube and power...
This robot was generated by BowlerStudio based on a simple slide-bar style interface. The robot parts were generated an then sent to my 3d printer and printed out. I assembled the robot and used BowlerStudio to calibrate it in about an hour (full assembly...
We contacted Baby-Robot Studio and Dakota Studio Bar because they are friends of us who are involved in the local artistic scene and we thought they might help. We offered them to prove the NeuroLS System experience and decide if it could benefit their...
Naminukas gains a new mode of locomotion - driving while hanging from a tree branch or similar structure like pole, pipe or bar:As you can see in the video robot also gained a new ability to drive in a statically stable way but only on flat and non inclined...
In the 5th Episode of my small walking robot series I show some kinematic models in Desmos, take a look at a laser scanner, replace some parts and tweak the robot's gait. Links to Desmos.com are below Favoritehttps://www.desmos.com/calculator/rpnk0wnpvj...
Find below the Bar Stool, easy in flatpack and convenient popped up. You are free to modify all parameters in the model, including the thickness of your plywood sheet. So you can make this template fit on any piece of plywood. The photo is a bar stool...
I am adding a impact bar.The new idea with back/front cover is to design around the impact bar. The back cover has an internal plastic structure and a outer molded CF cover. not a fan of the sharp intersection between top/bottom cover.
The main functions in the Arduino program is working! I have spent the last month programming the various functions while parts for the BottleBot are printing. Functions like moving the conveyor belt, positioning of bottles, as well as filling them seems...
This is a small USB power equalizer bar with an integrated microphone. Different modes and color settings can be selected with push buttons on the rear side. There is also a version with an integrated battery. ---------- more ---------- The device is...
The ROV consists of two major parts: the outside frame which houses the thruster on the wet side, and keeps the water out; and the inside ball which contains all the electronics and hangs and rotates the outside frame to vector the thrusters as necessary.The...
The software included, called simply 'Scribe' was designed for mass duplication efforts plus printing, so wasn't suitable.It basically consists of a list of queued operations, and just typically either takes an ISO copy, or writes an image back to disk....
---------- more ---------- After working at some other projects at home I finally had some time to resume work on this project. As the video shows, the base is functional (but still teleoperated). The left and right side panels can be removed by unscrewing...