32 Results for "3D%20printing"

Chitu 3D Printer Mainboard Hacking
Project by J.C. Nelson
Studying the encryption on Chitu's 3D Print controllers
- 39
- 26

Sigmoid S7P 3D Printer Control Board
Project by pkElectronics
Two hearts are better than one, so why not have five. Quadcore RPI CM4 and a MCU on a single board for true all-in-one 3D printer control.
- 2.1k
- 78

Quadruped w/3D Printed Recirculating Ball Screws
Project by Jeff
Quadruped robot to push 3D printed component limits. Minimizing cost by increasing development hours, made total sense when I started.
- 26
- 22

Upgrade your 3D printer from 8bit to 32bit
Project by robert
The latest marlin had ported to stm32 board,everything works, stable and smooth,have BLTouch,etc.
- 509
- 176

CM6 - Compliant 3D printed robotic arm
Project by Petar Crnjak
Cheap, Open-source, safe, and compliant 6 - Axis 3d printed robotic arm based on Quasi direct drive BLDC drives.
- 112
- 92

Thermochromic paint clock
Project by Ivan Stepaniuk
A 3D-printed, 7-segment clock using home-made black-to-white thermochromic paint
- 4
- 4

The Slowest Video Player with 7-Colors!
Project by Manuel Tosone
Watch your favorite films at 1 frame per minute
- 19
- 18

Makown smartwatch
Project by Ilyas Akhmetzyanov
Smartwatch platform for makers
- 10
- 7

Home Smart Mesh
Project by Wassim
Mesh of sensors, zigbee, custom RF, BT, wifi, all to MQTT Gateways on Raspberry Pi with database, dashboard and webapps.
- 189
- 132

ramanPi - Raman Spectrometer
Project by fl@C@
The open source 3D Printable Raman Spectrometer using a RaspberryPi and easy to find off the shelf components..
- 2.6k
- 703

AxxSolder
Project by AxxAxx
STM32 Based soldering station for JBC cartridges
- 23
- 18

OV-Watch: a STM32 smart watch
Project by quenelle
A smart watch based on STM32 & LVGL & FreeRTOS
- 37
- 35

GPS_device-logger_STM32
Project by Ethan Durrant
Making a simple(ish) GPS device and logger using an STM32 MCU and Delorme gps2058 module.
- 14
- 10

Micro Mouse Robot V2
Project by Spencer
This robot is designed to compete in the Micro Mouse competition. This is a robotic maze solving challenge.
- 10
- 5

Faze4 Robotic arm
Project by Petar Crnjak
Faze4 is 3d printable 6 axis robotic arm . It uses stepper motors and 3d printed cycloidal reducers.
- 194
- 144

1
2
3
>
>|