802 Results for "3D%20printing"

Easy cyclone for your shopvac with 3D printing
Project by Audrey Robinel
quickly create a cyclone dust separator with 2 buckets and a few 3D printed parts.
- 864
- 7

3D Print Babbage's Difference Engine No.2
Project by MechRedPanda
A fully functional replica of Charles Babbage's Difference Engine No.2 with 3D printed parts
- 28
- 32

3D Printed Hand-Following AI Task Light
Project by Harry Gao
An Arduino and Python powered task light that uses AI object detection to track and follow your hand.
- 19
- 18

Using a Cubic Lattice for 3D Printed Bouncy Balls
Project by Aidan Leitch
Using 3D lattice structures to improve compliant consistency in non-rigid 3D prints, or in this case, bouncy balls.
- 242
- 9

Cheap and Easy to Build 3D Printer
Project by Sugapes
A budget 3D printer that is easy to build with basic tools. A closed loop system using optical mice is to be used for greater accuracy.
- 667
- 225

DIY Polishing Station for 3d-printed Parts
Project by chiz
A DIY polishing station to smoothen 3d-printed parts built using Arduino and portable humidifier.
- 2.5k
- 30

Atlas - 6DOF 3D printed universal robot
Project by Damian Lickindorf
An Odrive + steppers based construction, with 5x 3D printed hollow shaft reducers and an internal CAN network.
- 2.3k
- 562

Wahoo Elemnt Bolt Bike GPS 3D printed repair
Project by Brieuc du Maugouër
3D printed part to repair the mount of a Wahoo Elemnt Bolt bike GPS.
- 1
- 1

3D Printed Vortex Particle Separator for Shop Vac
Project by Aaron P.
A small(er) Vortex Particle separator that can be easily 3D printed. Use with a 2" or 1.25" (adapters needed - can be printed) vacuum hose.
- 339
- 0

3D Haptic Vest for Visually Impaired and Gamers
Project by Sean Benson
This project's goal was to make a vest that a visually impaired or gamer could use when moving around in their environment(real or virtual).
- 2.3k
- 59

3D Printed Enclosure/Body for 2 Pin Plug
Project by Amal Mathew
Using 3D Printing to replace or build plug body for 2 pin plug.
- 168
- 1

CAN bus Reduce the wires of your 3D printers
Project by mark
Reduce the wires from more than 19 to only 4
- 33
- 25

3DESP: plug-and-play WiFi for 3D printers
Project by penelopeblue330
the ultimate board to IoT every 3D printer
- 23
- 17

(8:1) 3D Printed Planetary Gear Actuator Module
Project by Dongil Choi
3d printed 8:1 planetary gear ratio actuator module with VESC firmware based circular motor driver
- 43
- 40

3D Printed Rotary Time Tracker for Task Management
Project by quincy
Track your tasks at your desk when working from home using magnets!
- 13
- 12

|<
<
5
6
7
8
9
>
>|