17 Results for "『 모든문의 OIO=5793=7458 』 선릉셔츠룸㈄『 모든문의 OIO=5793=7458 』 Ηcake²셔츠룸테란강남셔츠룸デwriter 셔츠룸테란강남셔츠룸 선릉셔츠룸⒁셔츠룸사이즈┲exhausted⅔"

A 16x16 LED matrix display from scratch
Project by Erik van Zijst
Stitching together multiple 8x8 matrix panels on a custom PCB, hooking it up to a microcontroller and writing Tetris for it
- 2
- 2

Reviving the TI-92 calculator into a RPI PC
Project by pcadic
We are re-engineering the old PCB board into a modern PCB for a simple swap. The goal is to get an up to date RPI computer
- 80
- 54

volcon
Project by clewsy
USB volume controller with a VCR head-drum for the knob.
- 10
- 14

BlakRPI 2K
Project by pcadic
2560x1440 2K Display Keyboarded RPI handheld computer
- 40
- 40

PlainDAQ - DAQ Module for Raspberry Pi Pico
Project by Alperen
Open Source DAQ module for Raspberry Pi Pico
- 13
- 12

Binary to Hex 7-Segment Decoder w/ Discrete Parts
Project by Eric Ljungquist
A discrete component solution to convert 4-bit binary to 7-segment display signals.
- 1
- 1

Ethersweep
Project by Jan Neumann
An Open Source Ethernet controllable stepper motor. Easy interfacing with JSON and UDP from any device on the network in any language.
- 171
- 130

USB Sleuth Cable Tester
Project by Spencer Maroukis
The device tests for continuity and internal resistors within various USB Cables and exposes some pins for multimeter testing.
- 71
- 47

4 Port USB Hub
Project by Lacho Tomov
Using GL850G IC on a 2 layer board, made with KiCad
- 8
- 4

IoT RGB LED Matrix Controller (ESP32)
Project by Solenoid
This project is about building and programming an ESP32 based controller for a 32x32 RGB LED matrix, controlled from Node-RED over MQTT
- 87
- 35

KAmp
Project by Kuro
TPA3116D2 based audio amplifier
- 140
- 11

Aurora: Motion activated underbed LED light
Project by Max
Underbed RGB LED light (controller): Motion activated, separate push button to control lightning (different modes), logarithmic LED-fading
- 636
- 3

Pyxel Paradise
Project by rkrishnasanka
A DIY mini arcade cabinet that can run games built using Pyxel (https://github.com/kitao/pyxel) on the Raspberry Pi.
- 7
- 7

kicad StepUp: a Seamless ECAD MCAD Synchronization
Project by Maurice
Keep your design synchronized between ECAD and MCAD allowing to optimize the layout based on the mechanical constraints.
- 25
- 22

Astrophotography Camera Mount
Project by Chris
A 3D-printed 10000 : 1 gear reducer and control hardware used for astrophotography
- 30
- 17

1
2
>
>|