17 Results for "3D printing"

3D Printed Flying wing FPV Drone
Project by K+
In this project, the objective was to build a FPV flying wing with over 700mm wingspan that could be printed under 24 hours.
- 825
- 18

DJI FPV 6S BATTERY - DIY Compatible
Project by theogene
Alternative to the pricey official DJI FPV battery. 3D printing, Electronic modification, Compatible 6S LIPO fitting, CAN bus communication.
- 46
- 34

Open Sky Anchor WiFi Drone Brings The GIG
Project by Josh Starnes
Mission "Wifi" Impossible > Bring Long Range 5G and 2.4 G WiFi Backed By A 1 Gigabit Fiber To The East Brainerd EF-3 Tornado Disaster area.
- 2.7k
- 120

18 DOF High-Flotation Hexapod Robot
Project by ken.do
Six legs, 18 servos, with optional high-flotation mode. My first project that combined robotics and 3D printing.
- 371
- 42

Mini-X Quadcopter Drone
Project by ken.do
Small, inexpensive, easy to fly, easy to mod, 250mm multipurpose quadcopter.
- 38
- 31

Raptor V-Tail Quadcopter Drone
Project by ken.do
Original design v-tail quadcopter, all pieces 3D printed. 2213 935kv motors running 10.5 inch props with a 4400mah battery.
- 599
- 46

Parametric 3D Printed Cylindrical Coupling
Project by Conrad Brindle
Used as a base for assemblies, just put in your parameters and export the STL
- 16
- 13

RC FPV tank rover
Project by Brian Brocken
An almost completly 3D-printed tank equipped with an FPV system to explore and discover the unknown
- 169
- 167

MiniHawk VTOL
Project by Steve Carlson
A fully 3D-Printable VTOL aircraft, designed as a hybrid fixed-wing plank + tricopter planform. For FPV and UAV experimentation.
- 222
- 170

AIA-Teddy: Breathing Life into AI Companionship
Project by Noman
Crafting AIA-Teddy: An AI-infused teddy bear, merging tech with storytelling, turning SciFi companionship into child's interactive reality.
- 0
- 0

PCB Motor
Project by Carl Bugeja
A smaller and cheaper open source brushless motor
- 3.9k
- 610

PlutoX Rover
Project by siddharth.c
Using the sensors and controller of a drone , I created a rover to use the drone stability features on the ground.
- 57
- 41

Hover-Craft
Project by siddharth.c
I used the Primus X flight controller board to manoeuvre an extremely agile hover-craft frame I designed.
- 37
- 29

My first copter build with RPi2 and Emlid Navio2
Project by Dmitriy
Focused on making clear every building step with helpful links and tips for total noobs (like me) who wants to get started with drones
- 5k
- 47

LOTP Robot Dog V2
Project by Limenitis Reducta
Modular Autonomous Quadruped Robot Project (Open Source)
- 194
- 150

1
2
>
>|