29 Results for "《〈 문의 OIO↗5793↗7458 》〉 셔츠룸ヒ《〈 문의 OIO↗5793↗7458 》〉㎛beforehandム셔츠룸후기셔츠룸후기╇pen 선릉셔츠룸셔츠룸가격 셔츠룸‰강남셔츠룸㉦nestㅳ"

Open Exosuit for Differently Abled
Project by Alex M Sunny
This is a lower limb exoskeleton developed to aid patients with walking disabilities in their therapies and to perform simple tasks.
- 2k
- 57

2 Stroke Engine Model
Project by semigg
3D printed realistic 2 stroke engine model. It can be almost completely printed with a 3d printer.
- 1
- 1

3D printed high torque gearbox - An electric hoist
Project by semigg
I made this 3d printed high torque worm gearbox. It called also winch, hoist or crane. The maximum force it can lift is 737 newtons (75 kg)
- 13
- 10

Building a Mechanical(Geared) Press (3d printed)
Project by semigg
This is a mechanical press. It has about 200 kg/ 440 lb press capacity (theoretically). The working area is about 100x100x150 mm.
- 9
- 12

3D printable linear servo actuator
Project by semigg
100 kg / 215 lb pushing/pulling force, 7mm/s piston speed, 100mm stroke (adjustable limitswitch)
- 7
- 6

Magnetic Gears
Project by semigg
How about instead of physical contact meshing, a non-contact magnetic meshing by permanent magnets?
- 5
- 5

Bored No More
Project by Jazzmyn
Interactive Science Fair Board Using Arduino, big buttons, servos, and motors create excitement while interacting with science.
- 1.2k
- 6

Bike adapted bolt on independent rear axle trike.
Project by customshoppe
- 2
- 1

Robotic Arm Project
Project by madivak
Driving a couple of stepper motors with a FRDM-KL25Z MCU (i have lately switched to K46f + wireless control (joystick))
- 690
- 19

Lego Optics Lab: Worm Drive Pan/Tilt Mount
Project by Steve Schuler
How I built a worm drive pan/tilt mount out of Lego
- 916
- 2

Box0
Project by Kuldeep Singh Dhaka
Free and open source tool for exploring science and electronics anytime anywhere
- 6.7k
- 109

Control Snap Circuits Relay With Kano Computer
Project by Steve Schuler
How to control a relay with the Kano Computer (Raspberry Pi)
- 717
- 9

Lego Optics Lab: Polariscope
Project by Steve Schuler
How I built a polariscope for my Lego Optics lab.
- 669
- 13

Raspberry Pi 3 Desktop a 7-yr-old Can Build & Use
Project by Steve Schuler
Teach programming, electronics, and mechanics with the Kano Computer and Snap Circuits.
- 3.2k
- 14

My Weird Arduino Powered Clock
Project by Dante Roumega
I wanted to make a clock for my room that fit in with my weird creations, so I did :D
- 646
- 15

1
2
>
>|