16 Results for "《 예약문의 OIO↗8489↗8306》강남가라오케₃㏜apart청담가라오케㏛선릉가라오케가라오케┶Ｑ강남가라오케loving 청담가라오케㎰가라오케사이즈øもsnow"

RepPanel
Project by Wolfgang
Alternative to PanelDue. Embedded UI for Duet & RepRap based 3D printers. Running on the ESP32. WiFi or UART connectivity
- 13
- 10

Remoticon: Printing Precisely Demo
Project by Eric Moyer
Printing Precisely - Desktop 3D Printer Calibration
- 9
- 7

Stratasys FDM1650 Retrofit
Project by Noah B Johnson
Tearing down and retrofitting a 90s FFF 3D printer to be a high-temp beast
- 2
- 1

A Wheel
Project by Daren Schwenke
Another Satisfying Single Wheel Terrifying Hoverboard Conversion
- 20
- 25

BLDC Servoextruder
Project by Matthias Hasenfus
Lightweight filament drive featuring a BLDC motor.
- 1
- 2

Arcus-3D-M1 - Full Color Filament Printer
Project by Daren Schwenke
Active mixing, fused filament fabrication 3D printer.
- 1.3k
- 76

3D-Printable Propeller
Project by Anton
Using a RepRap 3D printer to manufacture functional propellers for UAVs.
- 132
- 6

XL heated bed
Project by Daren Schwenke
I needed an extra large 450mm diameter, high output, heated bed for the Arcus-3D-M1. One day build, locally sourced, less than $20
- 4
- 6

Stepper mounted driver
Project by Daren Schwenke
For when just sending signals is better.
- 5
- 6

Arcus-3D-M2 - Mixed material filament printer
Project by Daren Schwenke
Active mixing, fused filament fabrication 3D printer.
- 1.1k
- 56

Arcus-3D-M2 - Ceramic Heated Bed
Project by Daren Schwenke
Low cost, large build diameter heated bed made from a floor tile.
- 10
- 10

Arcus-3D-M2 - Liquid Cooled Stepper Drivers
Project by Daren Schwenke
Got moving water? Might as well use it.
- 7
- 4

"Infinite" Build and Dual Head Upgrade
Project by Brandon Langdon
Adding a 45 degree angled belt bed and second extruder head to an older, defunct, 3D printer.
- 6
- 4

Arcus-3D-C1 - Cable 3D printer
Project by Daren Schwenke
3D printable, Open Source Hardware, tripod kinematics, cable driven 3D printer
- 5.2k
- 157

3D Fabricator
Project by Chuck Glasser
What happens when FDM, 2 lasers, Juki vacuum pickup, multiple cameras and fluid pumps are loaded onto a single machine head.
- 564
- 5

1
2
>
>|