9245 Results for "3D printing"

Revision 2 - 3D printed parts
Log from Locomatrix - 3D POV - a different approach
I want to have some clean, new and updated prints - so I had to basically redesign everything, except the gear parts. The gear that is stuck on the motor is bought and still on there. The motor will be fixed with screws and the standard screw size is...

Decentralised Manufacturing: 3D Printed Cases
Log from Tick Tock Timer
So the question I have been asking myself for a few months now is "should I switch to injection molding for the case?" I'm still 3D printing all of the Tick Tock Timer case and I am able to produce around 30 good quality prints per month using 2x 3D...

3D Printing
Instructions from IoT Cat Litter Box (with ESP32 and Thingspeak)
You can download all the stl files on the following websites: https://www.thingiverse.com/thing:3737074 I printed the whole structure in PLA, usign two different colors. The whole print took me around 5h, using 0.2 mm resolution and 10% infill. No supports...

3D Printing & Design References
Log from Spacecraft hatch parts
I've finished designing a version of the latch that can be 3D printed, which is now underway. I'm sure I'll find some tolerance that is too tight, or some part interference, but that's just the way 3D printing goes in my experience...In the meantime...

3D printing waste and prototyping
Log from PAROL6 - Desktop robotic arm
The picture above shows all the failed parts printed for PAROL6 robot. It was not the printer that failed but the engineer. I will write a short entry on how to reduce waste when 3D printing by doing the right design choices and checks. * Do not...

3D printing tips
Log from Feeding Experimentation Device 3 (FED3)
This log will cover 3D printing tips. If you have suggestions from your own experience please leave them below!FED3 was designed to be printed with minimal support material, as our printers don't have supports. You'll notice that many of...

Choice of 3D printing technology
Log from SonarPen - earphone >> smart pen
3D printing is the greatest gift for Makers. However, if you are serious about developing your own hardware, invest in an SLA 3D printer or send your prints to a lab with SLA equipment. It is especially true when the design has a lot of fine details....

Now in 3d, the Return!
Log from Science Tricorder by Olympus Heavy Industries
Gotten a lot further along with the 3d shell, the primary parts are at least mostly done and I'm working on test-printing and fine-tuning stuff now. The big things left are getting the interface panels for the body and door further along. The main body...

Rotating Base Designed, 3D Printing has begun!
Log from Ivan the Teambuilt Robot
It was davedarko in the comments who suggested that we build a robotic arm and that's what we are doing. I tried to develop a rotary arm segment that could be repeated but when I showed it to someone with pretty good robotics knowledge he shot it down...

2018-03-16
Log from Valify V2 Robot Lawnmower
3D Printing Prototype Motor Brackets before CNC milling. Read full post here: 3D Printing Prototype Motor Brackets

Starting 3D Printing and Assembly
Log from NAVI - "Hey, listen!"
I've uploaded a Part 1 video on printing and assembly of NAVI. I've also decided to change my initial plan of using Black Widow 1200kv motors, instead opting for 920kv motors and external ESCs (they are however round, and the diameter of the motor, so...

3D Modeling
Instructions from Positivitypunk Backpack
My build started in Fusion 360. First modeling everything that needed to fit within the back and arranged them somewhat to fit tightly. I left room for a raspberry pi, which I did not model because I measured the space between the components and found...

Upload STL files for 3D-printing to GitHub
Log from DeePicBot
GitHub offers nice 3D viewer for STL files which works in browser. You can take a look on generated STL files by visiting our repository.Simply click on STL files and the view should run.

Our 3D printer has arrived!
Log from Sienci Mill One: Simplifying Desktop CNC Milling
March 31, 2016Our 3D printer has finally arrived here in Waterloo all the way from Guangzhou! It’s a Tevo Tarantula that we picked up for just under $400 CAD.We’re moving into exam season so the project will be slowing down for a few weeks until we can...

Interlude: how to get more folks using 3D printers well
Log from 3D Prints for Teachers of the Visually Impaired
We have been busy trying to figure out how to scale our Google Group and what types of 3D prints people actually want to teach their students, and have been excited that some undergrads at University of North Carolina have jumped in as part of a community...

|<
<
9
10
11
12
13
>
>|