I must confess I haven't spent much time looking at NTC curves before. My prior knowledge was that they are somewhat ill-defined and can only deliver reliable measurements when calibrated individually. source: https://support.belimo.us/Documentation/Standards-Compliance/957165601/What-is-the-difference-between-NTC-10K-Type-2-and-Type-3-sensors.htm...
First up, the latest revision. Small changes from the last version including tightening up various current loops in the buck converter and moving the battery-side transient TVS diode to the anode side of the reverse-polarity protection diode to...
The oven gives you a bunch of informative feedback over serial about its current operation. For example, here's the output from a reflow process: Reflow Started Profile Settings (1) PreHt: 100°C, 80s Heat: 180°C, 220s Ref: 240°C, 30s RefKp:...
In the Maker community there are projects to make Virtual Reality headsets to use with the PC, but these are for wired use, so there is room for a wireless solution that does not involve using a cell phone. Currently the best: https://hackaday.io/project/187343-easy-pancake-lensesAnd...
After the explorations with #YGREC-РЭС15-bis, I reached several limits and I decided to scale it down as much as possible. And this one will be implemented both with relays and VHDL, since the YGREC8 is a great replacement for Microchip's PICs....
Any enclosure needs to be easy to access yet provide enough space to get all of our cables in and out without being too big. A tough challenge!---------- more ----------Once our technology solution is chosen, we have to mount it, cable it, make it all...
SATA StatusAfter weeks of painful debugging. I have been able to read and write to the hard drive!I ran into an issue though... the speed at which I can communicate with my FPGA to/from my computer maxes out at about 16MBs and the hard drive reads/writes...
SubtractionI have had a bit of a problem getting my head around subtraction and the borrow/carry flag. With some CPUs (such as the 6502) the carry flag is set and when underflow occurs then the carry flag is cleared. This works of course but makes JNC...
Today we present the FlameWheel Robot assembly tutorial and quick-start guide! It is rather difficult to assemble this robot without guidance. Feel free to refer to my introductory tutorial today.Flamewheel (A 2WD Remote Control Robot) is part of our...
My dear readers, today I will fascinate your eyes and minds with this beautiful work of art.Made in a hurry. I will draw the schematics later by hand like usual.The sound system is based on subminiature Soviet Union vacuum tubes and it consists of 5...
The story so far... Update: Row scanning working.Known/working: Building and loading via JTAG new firmware into the main FPGA. This firmware is starting from scratch, we don't understand much yet about the default Barco firmware, although we've dumped...
In another page, I described my adventures converting an Ubuntu DEB package to an RPM package. This provided me with a native toolchain for my Linux workstation. I wished though that there was a solution that would allow far more Linux users, no matter...
In this project, we will build a 2.4GHz Wlan scanner using the nRF24L01 radio board. In this project, the output delivers all the interference and information in the scanned area in the form of ASCII codes. In the project of making this scanner,...
Make contact. Unscrambled circles will get you there:hackaday.io/_ _ _ _ _ _ _ Across: 3: this is what project #164913 is all about 5: dressed in stripes of BBROYGBVGW 8: I go clack and have an electromagnet 11: the brain of the circuit 13: one of the...