Close

5761 Results for "%EA%B0%95%EB%82%A8%EC%85%94%EC%B8%A0%EB%A3%B8%E3%80%8Eoio_%EF%BC%94%EF%BC%96%EF%BC%94%EF%BC%98_%EF%BC%90%EF%BC%99%EF%BC%93%EF%BC%90%E3%80%8F %E2%88%8F%EC%84%A0%EB%A6%89%EC%85%94%EC%B8%A0%EB%A3%B8 %3E%EC%84%A0%EB%A6%89%EB%A0%88%EA%B9%85%EC%8A%A4%EB%A3%B8%E2%88%88 %EA%B0%95%EB%82%A8%EB%A3%B8%E2%88%82 %EC%84%A0%EB%A6%89%EC%9C%A0%ED%9D%A5%E2%88%81 %EA%B0%95%EB%82%A8%EB%A3%B8%EC%8B%B8%EB%A1%B1%3C %EA%B0%95%EB%82%A8%EC%9C%A0%ED%9D%A5%E2%88%80 %EC%84%A0%EB%A6%89%EB%A3%B8%EC%8B%B8%EB%A1%B1%C2%B1 %EC%84%A0%EB%A6%89%EB%9E%80%EC%A0%9C%EB%A6%AC %E2%88%86%EA%B0%95%EB%82%A8%EB%9E%80%EC%A0%9C%EB%A6%AC every"

  • Genesis V0.5 Documentation
  • Log     from FarmBot - Open-Source CNC Farming
  • Genesis V0.5 exhibits the following changes from Genesis V4The Tracks cable carrier is repositioned and now supported with teenuts and long M5 screws, just like on the GantryThe Z-axis motor mounting bracket has been made thicker and the holes for the...

  • Circuit Connection:
  • Instructions     from DIY Arduino Tic Toc Toe Game
  • Connect the push buttons keypad to Arduino Uno as shown in circuit diagram.(R1~A0,R2~A1,R3~A2,R4~A3,C1~A4,C2~A5,C3~Pin 2,C4~Pin 3).Also take a extra push button(Reset Button) and connect to Arduino.(Reset,GND).Connect all the pixel LEDs.(-Ve/GND~GND,+Ve/5V~5V,Data...

  • A 4-to-16 decoder board
  • Log     from AYTABTU - Discrete Computer
  • I've soldered up a 4-to-16 line decoder pcb. Two of those are required for the program address (ROM) bus, and at least two more for the data address bus (RAM). I will have up to sixteen ROM boards each holding sixteen (11-bit) words of memory.In order...

  • The f/Software Part 1: Key-mapping.
  • Log     from The fsociety Keyboard
  • In case you are the ones who have enough guts to try replicate this keyboard, there is one basic thing you should get yourself covered; that is the key input matrix and how it is being mapped. In your previous projects, chances are you only used a couple...

  • Initial LED Selection
  • Log     from E-Bike Light
  • When I set about this project the first thing I wanted to work out was what LED I was going to use, as this would drive the requirements of everything else in the project, driver, lens, heatsinking, etc. Due to personal preference I decided that I wanted...

  • Enecsys Microinverter Monitoring
  • Details     from Enecsys Microinverter Monitoring
  • 1 Intro The Enecsys Gateway is a Zigbee gateway allowing communications between the Enecsys microinverters and their monitoring backend. The Enecsys company is unfortunately defunct since 2015 and their DNS domains have been taken over by a UK enecsys...

  • Deghosting multiplexed LEDs
  • Details     from Deghosting multiplexed LEDs
  • Blinking LEDs, what can be easier, right? For a recent project I needed to multiplex 2 sets of 6 LED each. The circuit schematic has the LEDs driven by 6 pins on an Arduino plus two pins to activate one bank or the other. LEDs are these ones from LCSC....

  • EC Sensor
  • Log     from UltraTower
  • EC is the abbreviation for Electro Conductivity. It is used to determine the nutrient concentration of the solution. This factor is essential to optimize the soilless culture. Indeed, the nutrient concentration will not be the same for a seeding as for...

  • EC Sensor
  • Log     from UltraTower 2023
  • EC is the abbreviation for Electro Conductivity. It is used to determine the nutrient concentration of the solution. This factor is essential to optimize the soilless culture. Indeed, the nutrient concentration will not be the same for a seeding as for...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday